Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 169 October 2009
SIP User's Manual 3. Web-Based Management
Table 3-35: SNMP V3 Users Parameters
Parameter Description
Index The table index.
The valid range is 0 to 9.
[SNMPUsers_Index]
User Name Name of the SNMP v3 user. This name must be unique.
[SNMPUsers_Username]
Authentication Protocol Authentication protocol of the SNMP v3 user.
[SNMPUsers_AuthProtocol]
[0]
None (default)
[1]
MD5
[2]
Privacy Protocol
SHA-1
Privacy protocol of the SNMP v3 user.
[SNMPUsers_PrivProtocol]
[0]
None (default)
[1]
DES
[2]
3DES
[3]
AES-128
[4]
AES-192
[5]
Authentication Key
AES-256
Authentication key. Keys can be entered in the form of a text
password or long hex string. Keys are always persisted as long hex
strings and keys are localized.
[SNMPUsers_AuthKey]
Privacy Key Privacy key. Keys can be entered in the form of a text password or
long hex string. Keys are always persisted as long hex strings and
keys are localized.
[SNMPUsers_PrivKey]
Group The group with which the SNMP v3 user is associated.
[SNMPUsers_Group]
[0]
Read-Only (default)
[1]
Read-Write
[2] Trap
Note:
All groups can be used to send traps.
3.4.1.1.4 Configuring SNMP Trusted Managers
The 'SNMP Trusted Managers' page allows you to configure up to five SNMP Trusted
Managers, based on IP addresses. By default, the SNMP agent accepts SNMP Get and
Set requests from any IP address, as long as the correct community string is used in the
request. Security can be enhanced by using Trusted Managers, which is an IP address
from which the SNMP agent accepts and processes SNMP requests.
To configure the SNMP Trusted Managers:
1. Access the 'Management Settings' page, as described in ''Configuring the
Management Settings'' 164 on page .