Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
SIP User's Manual 170 Document #: LTRT-68809
Mediant 2000
2. In the 'SNMP Trusted Managers' field, click the right-pointing arrow button; the
'SNMP Trusted Managers' page appears.
Figure 3-96: SNMP Trusted Managers
3. Select the check box corresponding to the SNMP Trusted Manager that you want to
enable and for whom you want to define an IP address.
4. Define an IP address in dotted-decimal notation.
5. Click the Submit
6. To save the changes, refer to ''
button to apply your changes.
Saving Configuration'' 173 on page .
3.4.1.2 Configuring the Regional Settings
The 'Regional Settings' page allows you to define and view the device's internal date and
time.
To configure the device's date and time:
1. Open the 'Regional Settings' page (Management tab > Management Configuration
menu > Regional Settings
Figure 3-97: Regional Settings Page
page item).
2. Enter the current date and time in the geographical location in which the device is
installed.
3. Click the Submit
button; the date and time are automatically updated.
Notes:
• If the device is configured to obtain the date and time from an SNTP
server (refer to ''Configuring the Application Settings'' 61 on page ), the
fields on this page are read-only and cannot be modified.
• For an explanation on SNTP, refer to ''Simple Network Time Protocol
Support'' 451 on page .
• After performing a hardware reset, the date and time are returned to their
defaults and therefore, should be updated.