Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 207 October 2009
SIP User's Manual 5. Element Management System (EMS)
3. Add a Region for your deployed devices, by performing the following:
a. In the MG Tree, right-click the Globe icon, and then click Add Region
Figure 5-3: Adding a Region
; the
Region dialog box appears.
b. In the 'Region Name' field, enter a name for the Region (e.g., a geographical
name).
c. Click OK
4. Verify that the device is up and running (by performing a ping to its IP address).
; the Region is added to the MG Tree list.
5. Add the device's software version file to the Software Manager (refer to ''Upgrading the
Device's Software'' 221 on page ).
6. Add the device to the region, by performing the following:
a. Right-click the Region
icon that you added, and then from the shortcut menu,
choose Add MG
Figure 5-4: Defining the IP Address
; the MG Information dialog box appears.
b. Enter an arbitrary name for the device, and then in the 'IP Address' field, enter the
c.
device's IP address
d. Click
Ensure that 'IPSec Enabled' check box is selected, and then enter the IPSec
Preshared Key (defined in Configuring IPSec on page 204).
OK; the device is added to the Region and appears listed in the MGs List.