Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 243 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
[4]
The CDR Syslog message complies with RFC 3161 and is identified by:
Facility = 17 (local1) and Severity = 6 (Informational).
Start & Connect & End Call = CDR report is sent to Syslog at the
start, at connection, and at the end of each call.
Web/EMS: Debug Level Syslog debug logging level.
[GwDebugLevel]
[0]
0 = Debug is disabled (default).
[1]
1 = Flow debugging is enabled.
[2]
2 = Flow and device interface debugging are enabled.
[3]
3 = Flow, device interface, and stack interface debugging are
enabled.
[4]
4 = Flow, device interface, stack interface, and session manager
debugging are enabled.
[5] 5 = Flow, device interface, stack interface, session manager, and
device interface expanded debugging are enabled.
Note:
Web: Activity Types to
Report via Activity Log
Messages
Usually set to 5 if debug traces are needed.
The Activity Log mechanism enables the device to send log messages
(to a Syslog server) for reporting certain types of Web operations
according to the below user-defined filters.
[ActivityListToLog]
[PVC]
Parameters Value Change = Changes made on-the-fly to
parameters.
[AFL]
Auxiliary Files Loading = Loading of auxiliary files (e.g., via
'Certificate' page).
[DR]
Device Reset = Reset of device via the 'Maintenance Actions'
page.
[FB]
Flash Memory Burning = Burning of files or parameters to flash
(in 'Maintenance Actions' page).
[SWU]
Device Software Update = cmp file loading via the Software
Upgrade Wizard.
[ARD]
(1) ini parameters (AdminPage)
Access to Restricted Domains = Access to restricted domains,
which include the following Web pages:
(2) 'General Security Settings'
(3) 'Configuration File'
(5) 'Software Upgrade Key'
(4) 'IPSec/IKE' tables
(7) 'Web Access List'
(6) 'Internal Firewall'
(8) 'Web User Accounts'
[NAA]
Non Authorized Access = Attempt to access the Web interface
with a false or empty user name or password.
[SPC]
(1) IP Address
Sensitive Parameters Value Change = Changes made to
sensitive parameters:
(2) Subnet Mask
(3) Default Gateway IP Address
(4) ActivityListToLog
For example: ActivityListToLog = 'pvc', 'afl', 'dr', 'fb', 'swu', 'ard', 'naa',
'spc'