Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 267 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
URI. It uses the GRUU in the following messages: INVITE requests,
2xx responses to INVITE, SUBSCRIBE requests, 2xx responses to
SUBSCRIBE, NOTIFY requests, REFER requests, and 2xx
responses to REFER.
Note:
Web: User-Agent Information
EMS: User Agent Display Info
If the GRUU contains the 'opaque' URI parameter, the device
obtains the AOR for the user by stripping the parameter. The
resulting URI is the AOR.
For example:
AOR: sip:alice@example.com
GRUU: sip:alice@example.com;opaque="kjh29x97us97d"
Defines the string that is used in the SIP request header User-Agent
and SIP response header Server. If not configured, the default string
'AudioCodes product-name s/w-version' is used (e.g., User-Agent:
Audiocodes-Sip-Gateway-Mediant 2000/v.5.40.010.006). When
configured, the string 'UserAgentDisplayInfo s/w-version' is used
(e.g., User-Agent: MyNewOEM/v.5.40.010.006). Note that the
version number can't be modified.
The maximum string length is 50 characters.
[UserAgentDisplayInfo]
Web/EMS: SDP Session
Owner
Determines the value of the Owner line ('o' field) in outgoing SDP
messages.
The valid range is a string of up to 39 characters. The default value
is 'AudiocodesGW'.
For example: o=AudiocodesGW 1145023829 1145023705 IN IP4
10.33.4.126
[SIPSDPSessionOwner]
Web/EMS: Subject Defines the value of the Subject header in outgoing INVITE
messages. If not specified, the Subject header isn't included
(default).
The maximum length is up to 50 characters.
[SIPSubject]
Web: Multiple Packetization
Time Format
EMS: Multi Ptime Format
Determines whether the 'mptime' attribute is included in the outgoing
SDP.
[MultiPtimeFormat]
[0]
None = Disabled (default)
[1]
The 'mptime' attribute enables the device to define a separate
Packetization period for each negotiated coder in the SDP. The
'mptime' attribute is only included if this parameter is enabled, even if
the remote side includes it in the SDP offer. Upon receipt, each
coder receives its 'ptime' value in the following precedence: from
'mptime' attribute, from 'ptime' attribute, and then from default value.
PacketCable = includes the 'mptime' attribute in the outgoing
SDP -- PacketCable-defined format
Web/EMS: 3xx Behavior Determines the device's behavior regarding call identifiers when a
3xx response is received for an outgoing INVITE request. The device
can either use the same call identifiers (Call-ID, Branch, To, and
From tags) or change them in the new initiated INVITE.
[3xxBehavior]
[0]
Forward = Use different call identifiers for a redirected INVITE
message (default).
[1]
Web/EMS: Enable P-
Charging Vector
Redirect = Use the same call identifiers.
Enables the addition of a P-Charging-Vector header to all outgoing
INVITE messages.
[EnablePChargingVector]
[0]
Disable = Disable (default)
[1]
Enable = Enable