Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 281 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
Web/EMS: Proxy Name Defines the Home Proxy Domain Name. If specified, the Proxy
Name is used as the Request-URI in REGISTER, INVITE, and
other SIP messages, and as the host part of the To header in
INVITE messages. If not specified, the Proxy IP address is
used instead.
The value must be string of up to 49 characters.
[ProxyName]
Web: Redundancy Mode
EMS: Proxy Redundancy Mode
Determines whether the device switches back to the primary
Proxy after using a redundant Proxy.
[ProxyRedundancyMode]
[0]
Parking = device continues working with a redundant
(now active) Proxy until the next failure, after which it works
with the next redundant Proxy (default).
[1] Homing = device always tries to work with the primary
Proxy server (i.e., switches back to the primary Proxy
whenever it's available).
Note:
Web: Proxy IP List Refresh Time
EMS: IP List Refresh Time
To use ProxyRedundancyMode, enable Keep-alive with
Proxy option (EnableProxyKeepAlive = 1 or 2).
Defines the time interval (in seconds) between each Proxy IP
list refresh.
The range is 5 to 2,000,000. The default interval is 60.
[ProxyIPListRefreshTime]
Web: Enable Fallback to Routing
Table
EMS: Fallback Used
Determines whether the device falls back to the 'Tel to IP
Routing' table for call routing when Proxy servers are
unavailable.
[IsFallbackUsed]
[0]
Disable = Fallback is not used (default).
[1] Enable = 'Tel to IP Routing' table (or 'Outbound IP
Routing' table)
When the device falls back to its 'Tel to IP Routing' table
is used when Proxy servers are unavailable.
(or
'Outbound IP Routing' table), the device continues scanning
for a Proxy. When the device locates an active Proxy, it
switches from internal routing back to Proxy routing.
Note:
Web/EMS: Prefer Routing Table
To enable the redundant Proxies mechanism, set the
parameter EnableProxyKeepAlive to 1 or 2.
Determines if the device's internal routing table takes
precedence over a Proxy for routing calls.
[PreferRouteTable]
[0]
No = Only a Proxy server is used to route calls (default).
[1]
Web/EMS: Always Use Proxy
Yes = The device checks the routing rules in the 'Tel to
IP Routing' table for a match with the Tel-to-IP call. Only if
a match is not found is a Proxy used.
Determines whether the device sends SIP messages and
responses through a Proxy server.
[AlwaysSendToProxy]
[0]
Disable = Use standard SIP routing rules (default).
[1] Enable = All SIP messages and responses are sent to a
Proxy server.
Note:
Applicable only if Proxy server is used (i.e., the
parameter IsProxyUsed is set to 1).