Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 299 October 2009
SIP User's Manual 6. Configuration Parameters Reference
6.8.2 Call Waiting Parameters
The call waiting parameters are described in the table below.
Table 6-34: Call Waiting Parameters
Parameter Description
Web/EMS: Enable Call
Waiting
Determines whether Call Waiting is enabled.
[EnableCallWaiting]
[0]
Disable = Disable the Call Waiting service.
[1] Enable = Enable the Call Waiting service (default).
If enabled, when the device initiates a Tel-to-IP call to a destination that
is busy, it plays a Call Waiting Ringback tone to the caller.
The device's Call Progress Tones (CPT) file must include a Call
Waiting Ringback tone.
Notes:
The EnableHold parameter must be enabled on the called side.
For information on the Call Waiting feature, refer to Call Waiting.
For information on the Call Progress Tones file, refer to Configuring
the Call Progress Tones File.
EMS: Send 180 For Call
Waiting
Determines the SIP response code for indicating call waiting.
[Send180ForCallWaiting]
[0]
= Use 182 Queued response to indicate call waiting (default).
[1]
= Use 180 Ringing response to indicate call waiting.
6.8.3 Call Forwarding Parameters
The call forwarding parameters are described in the table below.
Table 6-35: Call Forwarding Parameters
Parameter Description
Web: Enable Call
Forward
Determines whether Call Forward is enabled.
[EnableForward]
[0]
Disable = Disable the Call Forward service.
[1] Enable = Enable Call Forward service(default).
The device doesn't initiate call forward, it can only respond to call forward
requests.
Note:
To use this service, the devices at both ends must support this
option.