Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 303 October 2009
SIP User's Manual 6. Configuration Parameters Reference
Parameter Description
Web: MLPP DiffServ
EMS: Diff Serv
Defines the DiffServ value (differentiated services code
point/DSCP) used in IP packets containing SIP messages that
are related to MLPP calls. This parameter defines DiffServ for
incoming
[MLPPDiffserv]
and outgoing
MLPP calls with the Resource Priority
header.
The valid range is 0 to 63. The default value is 50.
Web/EMS: Preemption Tone
Duration
[PreemptionToneDuration]
Defines the duration (in seconds) in which the device plays a
preemption tone to both the Tel and IP sides if a call is
preempted.
The valid range is 0 to 60. The default is 3.
Note: If set to 0, no preemption tone is played.
Web: MLPP Normalized Service
Domain
EMS: Normalized Service Domain
[MLPPNormalizedServiceDomain]
MLPP normalized service domain string. If the device receives
an MLPP ISDN incoming call, it uses the parameter (if different
from ‘FFFFFF’) as a Service domain in the SIP Resource-
Priority header in outgoing INVITE messages. If the parameter
is configured to ‘FFFFFF’, the Resource-Priority header is set
to the MLPP Service Domain obtained from the Precedence
IE.
The valid value is a 6 hexadecimal digits. The default is
‘000000’.
Note: This parameter is applicable only to device's using the
MLPP NI-2 ISDN variant with CallPriorityMode set to 1.
Web: MLPP Default Service
Domain
EMS: Default Service Domain
[MLPPDefaultServiceDomain]
MLPP default service domain string. If the device receives a
non MLPP ISDN incoming call (without a Precedence IE), it
uses the parameter (if different than “FFFFFF”) as a Service
domain in the SIP Resource-Priority header in outgoing (Tel-
to-IP calls) INVITE messages. This parameter is used in
conjunction with the parameter SIPDefaultCallPriority.
If MLPPDefaultServiceDomain is set to 'FFFFFF', the device
interworks the non-MLPP ISDN call to non-MLPP SIP call, and
the outgoing INVITE does not contain the Resource-Priority
header.
The valid value is a 6 hexadecimal digits. The default is
"000000".
Note: This parameter is applicable only to device's using the
MLPP NI-2 ISDN variant with CallPriorityMode set to 1.