Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
SIP User's Manual 306 Document #: LTRT-68809
Mediant 2000
Parameter Description
Web: SAS Local SIP TLS Port
EMS: Local SIP TLS Port
Local TLS port used to send/receive SIP messages for the SAS
application. The SIP entities in the local network need to send the
registration requests to this port. When forwarding the requests to
the proxy ('Normal Mode'), this port serves as the source port.
The valid range is 1 to 65,534. The default value is 5081.
[SASLocalSIPTLSPort]
Web: SAS Proxy Set
EMS: Proxy Set
Determines the Proxy Set (index number) used in SAS Normal
mode to forward REGISTER and INVITE requests from the users
that are served by the SAS application.
The valid range is 0 to 5. The default value is 0 (i.e., default Proxy
Set).
[SASProxySet]
Web: Redundant SAS Proxy Set
EMS: Redundant Proxy Set
Determines the Proxy Set (index number) used in SAS
Emergency mode for fallback when the user is not found in the
Registered Users database. Each time a new SIP request arrives,
the SAS application checks whether the user is listed in the
registration database. If the user is located in the database, the
request is sent to the user. If the user is not found, the request is
forwarded to the next redundant SAS defined in the Redundant
SAS Proxy Set. If that SAS Proxy IP appears in the Via header of
the request, it is not forwarded (so that loops are prevented in the
request's course). If no such redundant SAS exists, the SAS
sends the request to its default gateway (configured by the
parameter SASDefaultGatewayIP).
The valid range is -1 to 5. The default value is -1 (i.e., no
redundant Proxy Set).
[RedundantSASProxySet]
Web: SAS Survivability Mode
EMS: Survivability Mode
Determines the Survivability mode used by the SAS application.
[SASSurvivabilityMode]
[0]
Standard = All incoming INVITE and REGISTER requests
are forwarded to the defined Proxy list in SASProxySet in
Normal mode and handled by the SAS application in
Emergency mode (default).
[1]
Always Emergency = The SAS application does not use
Keep-Alive messages towards the SASProxySet and instead,
always operates in Emergency mode (as if no Proxy in the
SASProxySet is available).
[2]
Web: SAS Binding Mode
EMS: Binding Mode
Ignore REGISTER = Use regular SAS Normal/Emergency
logic (same as option 0) but when in Normal mode, incoming
REGISTER requests are ignored.
Determines the SAS application database binding mode.
[SASBindingMode]
[0]
URI = If the incoming AoR in the INVITE requests is using
a ‘tel:’ URI or ‘user=phone’ is defined, the binding is performed
according to the user part of the URI only. Otherwise, the
binding is according to the entire URI, i.e., User@Host
(default).
[1]
User Part only = The binding is always performed
according to the User Part only.