Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
SIP User's Manual 384 Document #: LTRT-68809
Mediant 2000
Parameter Description
If the parameter DialPlanIndex is configured (to select a dial
plan index), then the parameter DigitMapping is ignored.
For a detailed description of the digit mapping, refer to ''Digit
Mapping'' 401 on page .
Web: Max Digits in Phone
Num
EMS: Max Digits in Phone
Number
Defines the maximum number of collected destination number
digits that can be received from the Tel side
[MaxDigits]
when Tel-to-IP ISDN
overlap dialing is performed. When the number of collected digits
reaches the maximum, the device uses these digits for the called
destination number.
The valid range is 1 to 49. The default value is 30.
Note:
Web: Inter Digit Timeout for
Overlap Dialing [sec]
EMS: Interdigit Timeout (Sec)
Digit Mapping Rules can be used instead.
Defines the time (in seconds) that the device waits between digits
that
[TimeBetweenDigits]
are received from the Tel side when Tel-to-IP overlap dialing is
performed (ISDN uses overlap dialing)
. When this inter-digit timeout
expires, the device uses the collected digits to dial the called
destination number.
The valid range is 1 to 10. The default value is 4.