Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
SIP User's Manual 400 Document #: LTRT-68809
Mediant 2000
Notation Description Example
Represents any single digit.
x
-
Pound sign (#)
Represents the end of a number.
at the end of a
number
54324xx#:
represents a 7-digit number
that starts with 54324.
Represents any number.
A single
asterisk (*)
*:
represents any number (i.e., all
numbers).
For a description, refer to the text
appearing after this table.
x[n,l]y 0[5,3]15
The device also supports a notation for adding a prefix where part of the prefix is first
extracted from a user-defined location in the original destination or source number. This
notation is entered in the 'Prefix to Add' field in the Number Manipulation tables:
x[n,l]y...
where,
x
[n,l] = defines the location in the original destination or source number where the digits
= any number of characters/digits to add at the beginning of the number (i.e. first
digits in the prefix).
y
•
are added:
n
•
= location (number of digits counted from the left of the number) of a specific
string in the original destination or source number.
l
y = prefix to add at the specified location.
= number of digits that this string includes.
For example, assume that you want to manipulate an incoming IP call with destination
number +5492028888888 (area code 202 and phone number 8888888) to the number
0202158888888. To perform such a manipulation, the following configuration is required in
the Number Manipulation table:
1. The following notation is used in the 'Prefix to Add' field:
0[5,3]15
where,
• 0 is the number to add at the beginning of the original destination number.
• [5,3] denotes a string that is located after (and including) the fifth character (i.e.,
the first '2' in the example) of the original destination number, and its length being
three digits (i.e., the area code 202, in the example).
• 15 is the number to add immediately after the string denoted by [5,3] - in other
words, 15 is added after (i.e. to the right of) the digits 202.
2. The first seven digits from the left are removed from the original number, by entering
"7" in the 'Stripped Digits From Left' field.
Figure 9-1: Prefix to Add Field with Notation
In this configuration, the following manipulation process occurs: 1) the prefix is calculated,
020215 in the example; 2) the first seven digits from the left are removed from the original