Hewlett-Packard Mediant 2000 User's Manual
Download Operation & user’s manual of HP Mediant 2000 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP Mediant 2000
Pages: 496 (6.06 Mb)
Version 5.8 81 October 2009
SIP User's Manual 3. Web-Based Management
3. To change the user name of an account, perform the following:
a. In the field 'User Name', enter the new user name (maximum of 19 case-sensitive
characters).
b. Click Change User Name
4. To change the password of an account, perform the following:
; if you are currently logged into the Web interface with
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new user name.
a. In the field 'Current Password', enter the current password.
b. In the fields 'New Password' and 'Confirm New Password', enter the new
password (maximum of 19 case-sensitive characters).
c. Click Change Password
; if you are currently logged into the Web interface with
this account, the 'Enter Network Password' dialog box appears, requesting you to
enter the new password.
Notes:
• For security, it's recommended that you change the default user name
and password.
• A Web user with access level 'Security Administrator' can change all
attributes of all the Web user accounts. Web users with an access level
other than 'Security Administrator' can only change their own password
and user name.
• To reset the two Web user accounts' user names and passwords to
default, set the ini
• To access the Web interface with a different account, click the
file parameter ResetWebPassword to 1.
Log off
• You can set the entire Web interface to read-only (regardless of Web
user account's access level), by using the
button located on the toolbar, click any button or page item, and then re-
access the Web interface with a different user name and password.
ini file parameter
DisableWebConfig (refer to ''Web and Telnet Parameters'' 237 on page ).
• Access to the Web interface can be disabled, by setting the ini
• You can define additional Web user accounts using a RADIUS server
(refer to the
file
parameter DisableWebTask to 1. By default, access is enabled.
Product Reference Manual
• For secured HTTP connection (HTTPS), refer to the
).
Product Reference
Manual
.