Hewlett-Packard ProCurve NAC 800 Users Manual
Download Operation & user’s manual of HP ProCurve NAC 800 Gateway for Free or View it Online on All-Guides.com.
Brand: HP
Category: Gateway
Type: Operation & user’s manual for HP ProCurve NAC 800
Pages: 591 (8.37 Mb)
Remote Device Activity Capture
NAC 800 to Infoblox Connector
12-22
d. In the ### LOG ENTRIES HERE ### area, add the following line:
log { source(rdac); filter(f_mesg);
destination(d_dac); };
e. Save and exit the file.
f. Enter the following at the command line to restart the service:
service syslog-ng restart
7. Add the iptables firewall rule to allow this syslog traffic:
a. Stop iptables by entering the following at the command line:
service nac-es stop
fw_control stop
b. Open the following file with a text editor such as vi:
/etc/sysconfig/iptables
c. Add the following line before the # REJECT lines in the RH-Lokkit-
0-50-INPUT section, and after the RELATED,ESTABLISHED line:
d. -A RH-Lokkit-0-50-INPUT -s <INFOBLOX_IP> -p tcp -m
tcp --dport 514 -m state --state NEW -j ACCEPT
Where:
<INFOBLOX_IP> is the IP address of the Infoblox server.
e. Restart iptables by entering the following at the command line:
fw_control start
service nac-es start