Hewlett-Packard 2133 - Mini-Note - C7-M 1.6 GHz ULV User Manual

Download Function manual of HP 2133 - Mini-Note - C7-M 1.6 GHz ULV Laptop, Netbook for Free or View it Online on All-Guides.com.

Brand: HP

Type: Function manual

Pages: 18 (0.58 Mb)

To use a hotkey command on the computer keyboard, follow either of these steps:

●

Briefly press the fn key, and then briefly press the second key of the hotkey command.

– or –

●

Press and hold down the fn key, briefly press the second key of the hotkey command, and then

release both keys at the same time.

Displaying system information (fn+esc)

Press fn+esc to display information about system hardware components and the system BIOS version

number.

In the Windows fn+esc display, the version of the system BIOS (basic input-output system) is displayed

as the BIOS date. On some computer models, the BIOS date is displayed in decimal format. The BIOS

date is sometimes called the system ROM version number.

Initiating Standby (fn+f1)

Press fn+f1 to initiate Standby.

When Standby is initiated, your information is stored in memory, the screen is cleared, and power is

conserved. While the computer is in Standby, the power light blinks.

CAUTION: To reduce the risk of information loss, save your work before initiating Standby.

The computer must be on before you can initiate Standby.

NOTE: If a critical battery level occurs while the computer is in Standby, the computer initiates

Hibernation and the information stored in memory is saved to the hard drive. The factory setting for

critical battery action is Hibernate, but this setting can be changed in advanced power settings.

To exit Standby, briefly slide the power switch or press any key on the keyboard.

The function of the fn+f1 hotkey can be changed. For example, you can set the fn+f1 hotkey to initiate

Hibernation instead of Standby.

NOTE: In all Windows operating system windows, references to the sleep button apply to the fn+f1

hotkey.

4 Chapter 2 Using the keyboard

Top Brands