Hewlett-Packard A180 Update Manual

Download Update manual of HP A180 Motherboard, Server for Free or View it Online on All-Guides.com.

Brand: HP

Category: Motherboard , Server

Type: Update manual for HP A180

Pages: 15 (0.31 Mb)

Download HP A180 Update manual

HP A180 Update manual - Page 1
1
HP A180 Update manual - Page 2
2
HP A180 Update manual - Page 3
3
HP A180 Update manual - Page 4
4
HP A180 Update manual - Page 5
5
HP A180 Update manual - Page 6
6
HP A180 Update manual - Page 7
7
HP A180 Update manual - Page 8
8
HP A180 Update manual - Page 9
9
HP A180 Update manual - Page 10
10
HP A180 Update manual - Page 11
11
HP A180 Update manual - Page 12
12
HP A180 Update manual - Page 13
13
HP A180 Update manual - Page 14
14
HP A180 Update manual - Page 15
15
Table 2 HP 9000 supported firmware update methods
OthersHP Firmware Manager (FM)
HP 9000
Systems
MP-initiatedEFI ImageHP OFMHP OSIFM
OpenVMSWindows®LinuHP-UX
Cellular Systems
xNANANANANAxHP 9000
Superdome
sx2000
xNANANANANAxrp8440
xNANANANANAxrp7440
Non-Cellular Systems
NANANANANANAxC8000
NANANANANANAxrp24xx
NANANANANANAxrp54xx
NANANANANANAxrp7400
NANANANANANAxrp3410
NANANANANANAxrp3440
NANANANANANAxrp4440
Legend:
x = Available
NA = Not applicable
HP Smart Update Manager (HP SUM)
HP SUM is a tool that runs from a networked Windows X86 or a Linux X86 workstation or laptop.
The tool is included in the HP Smart Update Firmware Bundle for the supported servers (see table
above). HP SUM discovers the new firmware packages you currently have, the firmware versions
currently installed on your systems, which firmware components need to be updated, and allows
you to upgrade, downgrade or re-install firmware on one or multiple systems and enclosures. Since
HP SUM runs from a separate networked workstation, it is independent of the operating system
installed on your Integrity server. HP SUM can update the system firmware, ILO firmware , FPGA
firmware, and power monitor firmware regardless of the OS running on the blade or server. Using
HP SUM, you can perform firmware updates while the Integrity system is online or offline, powered
on or powered off while still connected to standby or housekeeping power.
Although the update might be done online, the activation of the system firmware and the FPGA
firmware requires a reboot. With the new version of HP SUM, the default behavior delays firmware
activation until you reboot the system at a convenient time. If you want HP SUM to activate the
firmware immediately, choose Upload and Activate.
The next time you reboot the system, the firmware will be activated. Before the reboot, you can
use the ILO GUI or CLI to verify the firmware versions. The firmware state will appear as Pending.
HP SUM has an interactive Graphical User Interface (GUI) and a non-interactive Command Line
Interface (CLI).
HP FM
HP Firmware Manager (HP FM) offers two types of firmware installation solutions: HP OS Initiated
Firmware (HP OSIFM) and HP Offline Firmware Manager (HP OFM).
HP Smart Update Manager (HP SUM) 7