Home | About | Contact

Hewlett-Packard A4500A - VMEbus Single Board Computer 744 Motherboard Hardware Manual

Download Hardware manual of HP rp2400 Desktop, Motherboard for Free or View it Online on All-Guides.com.

HP rp2400 Hardware manual - Page 1
1
Page 1
background image

rp24xx_cable_change_list

v1
Printed in the U.S.A.

Basic Cable Connections - HP rp2400 Series of Servers - Document Changes

The document Basic Cable Connections - HP rp2400 Series of Servers has been revised. See the table below.

IMPORTANT The latest versions of these documents, and any updates to these documents, are posted under 

the appropriate server at 

http://docs.hp.com

.

Ver. 1.0 

Page #

Ver. 2.0 

Page #

Description of Change

2

2

Send documentation comments to http://docs.hp.com/assistance/index.html.

3

7

For detailed installation, maintenance, and technical information, refer to the 
rp24xx Hardware Manual and other documentation (search on rp2400) at 
http://docs.hp.com. 

4

8

2. (Amber) Attention (ATTN) LED - When lit, indicates that a condition exists that 
requires operator attention and assistance from HP Support.

NOTE: For technical support please call your local support hotline or contact HP 
at 

http://www.hp.com/support

.

5

9

NOTE: For more information on console configuration, refer to the rp24xx 
Hardware Manual
 (search on rp2400) at 

http://docs.hp.com

.

Using a Secure Web Console PCI card as a System Console. If the Secure 
Web Console PCI card is to be used as a system console, first configure the 
Guardian Service Processor (GSP). For more information on GSP configuration, 
refer to the rp24xx Hardware Manual (search on rp2400) at 

http://docs.hp.com

.

Then, connect an RJ45 LAN cable to the Secure Web Console PCI card installed 
in an I/O card slot on the back of the server.

6

10

Using the LAN Console as a System Console. If a LAN Console is to be used 
as a system console, first configure the Guardian Service Processor (GSP). For 
more information on GSP configuration, refer to the rp24xx Hardware Manual 
(search on rp2400) at 

http://docs.hp.com

.

Then, connect it to the system with an RJ45 LAN cable to the RJ45 connector 
labeled 10BASE-T LAN Console connection on the back of the server.

6

10

NOTE: [regarding connecting Power Distribution Units (PDUs) to Dedicated AC 
Input Receptacles] Current requirements vary with input voltage, server 
configuration, and number of power supplies installed. Refer to “System Site 
Preparation” in the rp24xx Hardware Manual at 

http://docs.hp.com

.