• Home
• Brands
• HP Manuals
• HP 170X - JetDirect Print Server
• Hewlett-Packard 170X - JetDirect Print Server Hardware Installation Manual

Hewlett-Packard 170X - JetDirect Print Server Hardware Installation Manual

Download Hardware installation manual of HP 170X - JetDirect Print Server Network Card, Printer for Free or View it Online on All-Guides.com. This version of HP 170X - JetDirect Print Server Manual compatible with such list of devices, as: 170X - JetDirect Print Server, 300X, 500X, JetDirect EX Plus, JetDirect500X

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

2-2 Hardware Installation

4. For the 300X or 500X Ethernet print servers (J3263A or

J3265A), verify that the auto-negotiation switches are in their

default positions—all down. (For other options, see page 1-9.)

Figure 2.2 Hardware connections using a U.S. power module for the

HP JetDirect J3265A Print Server

Note

In the following steps, the circled numbers

correspond to those in Figure 2.2. The HP JetDirect

300X, 170X, and EX Plus have one printer port ➌.

The HP JetDirect 500X Token Ring and 300X have

no BNC port ➊. On the HP JetDirect 500X and

300X, the RJ-45 connector ➋ is used for either 10 or

100 Mbps operation. The JetDirect 170X has no

BNC port ➊.

5. Connect the print server to the network ➊ or ➋.

6. Connect the print server to the printer(s) ➌, ➍, and ➎.

If you are attaching only one printer to the 500X, HP

recommends that you attach that printer to Port 1 ➌.

If you are using DLC/LLC network protocols, your printer must

be connected to Port 1 (the DLC/LLC protocol is supported only

on Port 1).

7. Plug the power module into the power receptacle in the back of

the print server ➏.