Home | About | Contact

Hewlett-Packard 252663-B24 - PDU Power Distribution Strip Installation Instructions Manual

Download Installation instructions manual of HP 252663-B24 - PDU Power Distribution Strip Other for Free or View it Online on All-Guides.com.

HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 1
1
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 2
2
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 3
3
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 4
4
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 5
5
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 6
6
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 7
7
HP 252663-B24 - PDU Power Distribution Strip Installation instructions manual - Page 8
8
Page 1
background image

HP Modular Power Distribution 

Unit Kit 

Installation Instructions 

 

 

 

 

 

 

Overview 

These installation instructions are provided to assist qualified 
personnel with the installation of the HP Modular Power Distribution 

Unit (mPDU) Kit. 

The input voltage of a single phase mPDU is either 100 to 127 VAC 
or 200 to 240 VAC, depending on the model. 

The input voltage of a three phase mPDU is 200 to 240 VAC, phase-

phase or phase-neutral, depending on the model. 

The control unit (if included) provides the following features: 
 

Flexible mounting in 0U or 1U configurations, maximizing rack 
space (no additional parts are required for mounting) 

 

Overcurrent and short-circuit protection for each output (UL-
489-listed circuit breakers) 

 

Manual on/off control for each of the output load groups 

 

Pilot light for main AC input (depending on the model) 

 

IEC-320 C19 outlets to power extension bars or other IEC-320 
C20 plug-compatible equipment 

 

Easy identification and reset of overload circuits (circuit 
breakers move to Off position), minimizing downtime 

 

Power cord retention 

 

Recessed handles to prevent inadvertent power-off 

The extension bars (if included) provide the following features: 
 

Multiple power outlets, conveniently located for quick and easy 
equipment power connections 

 

Lighted main power indicator 

 

Attached 2-m (6-ft) input power cords 

 

Power cord retention and power cord labeling 

 

Modular PDU models 

To view the most recent modular PDU information, see the HP 

website (http://www.hp.com/go/rackandpower). 

From there, you can navigate to the appropriate page by following 

the steps below. 
1. 

Click Power infrastructure. 

2. 

Click Power distribution units. 

3. 

Click Modular. 

 

 

© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P. 

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty 

statements accompanying such products and services. Nothing herein should 

be construed as constituting an additional warranty. HP shall not be liable for 

technical or editorial errors or omissions contained herein. 

Part Number 240824-4 2 
October 2008 (Tenth Edition) 

 

0