• Home
• Brands
• HP Manuals
• HP 252663-B24 - PDU Power Distribution Strip
• Hewlett-Packard 252663-B24 - PDU Power Distribution Strip Installation Instructions Manual

Hewlett-Packard 252663-B24 - PDU Power Distribution Strip Installation Instructions Manual

Download Installation instructions manual of HP 252663-B24 - PDU Power Distribution Strip Other for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

HP Modular Power Distribution

Unit Kit

Installation Instructions

Overview

These installation instructions are provided to assist qualified

personnel with the installation of the HP Modular Power Distribution

Unit (mPDU) Kit.

The input voltage of a single phase mPDU is either 100 to 127 VAC

or 200 to 240 VAC, depending on the model.

The input voltage of a three phase mPDU is 200 to 240 VAC, phase-

phase or phase-neutral, depending on the model.

The control unit (if included) provides the following features:

• Flexible mounting in 0U or 1U configurations, maximizing rack

space (no additional parts are required for mounting)

• Overcurrent and short-circuit protection for each output (UL-

489-listed circuit breakers)

• Manual on/off control for each of the output load groups

• Pilot light for main AC input (depending on the model)

• IEC-320 C19 outlets to power extension bars or other IEC-320

C20 plug-compatible equipment

• Easy identification and reset of overload circuits (circuit

breakers move to Off position), minimizing downtime

• Power cord retention

• Recessed handles to prevent inadvertent power-off

The extension bars (if included) provide the following features:

• Multiple power outlets, conveniently located for quick and easy

equipment power connections

• Lighted main power indicator

• Attached 2-m (6-ft) input power cords

• Power cord retention and power cord labeling

Modular PDU models

To view the most recent modular PDU information, see the HP

website (http://www.hp.com/go/rackandpower

).

From there, you can navigate to the appropriate page by following

the steps below.

1. Click Power infrastructure.

2. Click Power distribution units.

3. Click Modular.

© Copyright 2006, 2008 Hewlett-Packard Development Company, L.P.

The information contained herein is subject to change without notice. The only

warranties for HP products and services are set forth in the express warranty

statements accompanying such products and services. Nothing herein should

be construed as constituting an additional warranty. HP shall not be liable for

technical or editorial errors or omissions contained herein.

Part Number 240824-4 2

October 2008 (Tenth Edition)

0