Hewlett-Packard Ethernet USB Network Adapter hn210e User Manual
Download Operation & user’s manual of HP Ethernet USB Network Adapter hn210e Other for Free or View it Online on All-Guides.com.
Brand: HP
Category: Other
Type: Operation & user’s manual for HP Ethernet USB Network Adapter hn210e
Pages: 30 (0.53 Mb)
Download HP Ethernet USB Network Adapter hn210e Operation & user’s manual
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
troubleshooting
15
❑ To locate computers on your network when your operating system is Windows
2000, Me, or XP:
1 On your Windows desktop, right-click My Network Places, then select
Search for Computers.
2 In the left panel in the Computer Name box, enter the name of a missing
computer and click Search Now.
3 Verify that you are using the same protocols on the computers as follows:
❑ From the Windows Start menu select Settings > Control Panel.
❑ Double-click the Networking & Dialup Settings icon.
❑ Double-click the Local Area Connection icon.
4 Verify that you are using the same workgroup names on the computers as
follows:
❑ On the Windows desktop, right-click My Computer and select
Properties.
❑ Click the Network ID tab. The workgroup (or domain) will be
displayed.
My Network Neighborhood is empty.
❑ Verify that you have logged on correctly. Refresh the screen by pressing F5
several times.
The LEDs on the adapter flash back and forth in rhythm.
❑ The driver for the Ethernet USB Network Adapter has not been properly
installed. Run the installation program again from the CD-ROM.
On some laptop PCs the Ethernet USB Network Adapter fails to configure correctly
after the drivers have been loaded.
❑ After loading the drivers:
1 Log off and disconnect the adapter from your laptop’s USB port.
2 Turn off your laptop.
3 Reconnect the adapter.
4 Reboot the laptop and log back on.