Hewlett-Packard Surestore Tape Library Model 3/30 Hardware Manual
Download Hardware manual of HP 330 Desktop, Printer for Free or View it Online on All-Guides.com.
Hardware Operator’s Guide
Main Menu
DLT Library
2–5
Library Utilities
The Library Utilities menu displays diagnostic, error, and configuration options.
Library Diags
Examine FSCs
View Configuration
Set Configuration
>
Library Diags Accesses diagnostic routines for the library.
Examine FSCs Displays the last 20 fault symptom codes.
View Configuration Displays the current library configuration.
Set Configuration Accesses library configuration options.
Library Diagnostics
The Library Diagnostics menu displays library diagnostic options.
Get-Put Loop
Mount Diagnostic
Dismount Diag
Unlock CAP Test
Mount-Dismnt Loop
Initialize Mechs
Demo Mode
>
The operator panel displays only
four lines. Use the arrow buttons
to scroll through the options.
Get-Put Loop Removes diagnostic tape from the CAP, moves the robot,
returns the tape to the CAP.
Mount Diagnostic Mounts a diagnostic tape into a drive.
Dismount Diag Dismounts a diagnostic tape from a drive.
Unlock CAP Test Unlocks the CAP and prompts the operator to manually
open and close the CAP.
Mount-Dismnt Loop Mounts and then dismounts a tape to a drive.
Initialize Mechs Initializes the library and performs an audit.
Demo Mode Makes random tape moves. (You must have at least one
data cartridge in the library and at least one empty cell.)
CAUTION:
Audit required—
After exiting Demo
Mode, the host software should perform an audit
to update the location of the cartridge tapes.