SpectraLink Corporation Installation
Link WTS – Link 3000 MCU
Part Number: 72-0059-01-J.doc Page 4
Table of Contents
1. About This Document 6
1.1 SpectraLink Corporation Model Numbers 6
1.2 Related Documents 6
1.3 Contacting SpectraLink 6
1.4 Icons Used in this Document 6
2. Installation Overview 7
2.1 Installation Steps and Responsibilities 8
3. Link Wireless Telephone System Description 9
4. Link Wireless Telephone System Components 10
4.1 The Master Control Unit 10
4.2 Base Stations 13
4.3 Link Wireless Telephones 14
4.4 Operator’s Console 14
5. Site Preparation 15
5.1 Required Materials Provided by Customer 15
5.2 Prepare Location for Shelves 17
5.3 Prepare Power for Shelves 19
5.4 Run Cables to Base Station Locations 19
5.5 Terminate Cables at Base Station Locations 21
5.6 Prepare Demarc Blocks 22
5.7 Install Demarc Blocks 25
5.8 Program Telephone System 25
5.9 Connect Cables from Base Stations and Phone Lines to Demarc Blocks 26
6 System Installation 31
6.1 Facility Analysis 31
6.2 Check Components 31
6.3 Install Shelves 32
6.4 Install Intershelf Junction Panel 33
6.5 Connect Power to Shelves 33
6.6 Install Cards 34
6.7 Connect the Intershelf Junction Panel 37
6.8 Connect Demarc Block RJ-21 Cables to Interface Modules 37
7. Install Base Stations 38
7.1 Mount Base Stations on Dropped Tile Ceilings 38
7.2 Mount Base Stations On Finished Ceilings 39
7.3 Install Outdoor Base Stations 39
7.4 Power Up and Check Diagnostics 40
8. System Initialization 41
9. Test System 42
9.1 Voice-test each Base Station 42
9.2 Run Listen Verify Diagnostic 42
10 Site Certification 43
11 Installation Forms 44