SpectraLink Link 3000 Install Manual

Download Technical bulletin of SpectraLink 3000 Network Router, PBX for Free or View it Online on All-Guides.com.

Brand: SpectraLink

Category: Network Router , PBX , Telephone , Wireless Router

Type: Technical bulletin for SpectraLink 3000

Pages: 3 (0.13 Mb)

Download SpectraLink 3000 Technical bulletin

SpectraLink 3000 Technical bulletin - Page 1
1
SpectraLink 3000 Technical bulletin - Page 2
2
SpectraLink 3000 Technical bulletin - Page 3
3
C:\windows\TEMP\Technical bulletin 99-01.doc 10/19/00
Technical Bulletin 99-01
Bulletin #: CS-99-001 Product Type: Link 3000
Software Version: None Hardware Revision: None
Access Level: Reseller Originator: Matt Jerger
Status: Approved Approvers: John Elms, Gary Bliss
Date: March 16, 1999
---------------------------------------------------------------------------------------------------------------------
Title: Setting up a CBL100.
Purpose: The purpose of a CBL100 is to convert the customer’s existing Link 2000
cabling to Link 3000 cabling.
Installation: The CBL100 is the same size as the JPI300. It is 6” high by 19” wide. It
mounts either in a 19” rack or on a wall.
There are 2 groups on each CBL100. Each group takes 1 RIC cable and 2 LIC
cables and converts them to 3 Interface Module Cables. The RIC is a male
connector. The LICs are female connectors. The Interface Modules are male
connectors.
How it works:
The panel takes the RIC cable and the 2 LIC cables and splits it out to 3
Interface Module cables. Here is the break down of each group:
Interface
Modules
Base Stations Lines
INTF 1 RIC 1-6 LIC1 1-16
INTF 2 RIC 7-12 LIC1 17-24 and LIC2 1-8
INTF 3 RIC 13-18 LIC2 9-24
DISCLAIMER
THE INFORMATION PROVIDED IN THE SPECTRALINK TECHNICAL BULLETIN IS PROVIDED "AS IS" WITHOUT
WARRANTY OF ANY KIND. NO OBLIGATION OR LIABILITY WILL ARISE OUT OF, SPECTRALINK RENDERING
TECHNICAL OR OTHER ADVICE OR SERVICE IN CONNECTION HEREWITH.