Hewlett-Packard Integrity cx2600 Maintenance Manual
Download Maintenance manual of HP Integrity cx2600 Server for Free or View it Online on All-Guides.com.
Virtual Front Panel
VFP: Display Virtual Front Panel
This command is executed from the Main Menu. The VFP display is a summary of the current
state of the system, including current LED states.
When invoked, the VFP command presents a summary of system status, using direct console
addressing. If the terminal is not recognized by the MP, VFP mode will be rejected. The summary
is sent to each individual user to avoid issues related to terminal type and screen display mode.
The VFP display states are refreshed once every second.
Who
WHO: Displays a list of MP connected users
This command displays the login name and operating mode (Main Menu, command, and so on)
of the connected console client users, and the port on which they are connected. For the LAN
and WEB console clients the remote IP address is also displayed.
If the local console client user did not originate the MP command interface session, there is always
one default user listed for the local serial port: local user i. If the local console operator types
CTRL+B, then the login name that the local operator used is displayed instead.
Exit from MP
X: Exit from MP command interface and disconnect from the system
This command disconnects the executing user from the system. This command is available from
the local port.
Diagnostics
XD: Diagnostics and/or Reset of MP
This command allows the user to perform some simple checks to confirm the MP's health and
its connectivity status. The following tests are available:
• MP Parameter Checksum
• Verify I
2
C connection (get BMC Device ID)
• LAN connectivity test using ping
• Modem self-tests
Also, the MP can be reset from this command. A MP reset can be safely performed without
affecting the operation of the server.
Management Processor Help System
The MP has a robust help system. To invoke MP HELP, enter he after the MP> prompt. The
following is displayed:
HE
==== MP Help: Main Menu ============================================(Administrator)===
Hardware Revision a5 Firmware Revision E.02.23 Jul 1 2003,15:18:47
MP Help System
Enter a command at the help prompt:
OVerview : Launch the help overview
LIst : Show the list of MP commands
<COMMAND> : Enter the command name for help on individual command
TOPics : Show all MP Help topics and commands
HElp : Display this screen
Q : Quit help
Enter one of the commands described above: OV, LI, , TOP, HE, Q
Management Processor Commands 107