• Home
• Brands
• HP Manuals
• HP StorageWorks P4000
• Hewlett-Packard P4000 Installation Instructions

Hewlett-Packard P4000 Installation Instructions

Download Hardware installation instructions of HP StorageWorks P4000 Gateway, Network Storage Server for Free or View it Online on All-Guides.com.

1

2

3

10. Locate the appropriate empty RAM slot and install the RAM.

11. Open the locking latches on this slot as shown.

12. Install the RAM by pushing straight down on the RAM.

When the RAM is fully seated, the locking latches will lock in place

on each side.

NOTE:

Note the locating key on the RAM, and in the mating

RAM slots on the motherboard. Make sure the locating

key in the RAM matches up with the locating key in the

motherboard slot. Failure to do so and forcing the RAM

in place will damage the system motherboard and/or

RAM.

13. Install the air baffle back in place as shown.

14. Align the top cover to the chassis and then slide it towards the front

panel to position it into place.

15. Once the cover is attached to the chassis, tighten the screw on the

top cover with a T-10 wrench.

16. Place the storage node back in the rack, connect the Ethernet cable,

and power on the storage node.

Upgrading the software

To upgrade software on P4000 G2s that are

in a management group

Continue with the software upgrade instructions in the 1GbE to 10GbE

SFP+ Migration Guide.

To upgrade software on P4000 G2s that are

new and/or not in a management group

1. Open the CMC and find the P4000 G2.

2. Log in to the storage node you want to upgrade.

3. Click Storage Node Tasks on the Details tab and select Install

Software.

4. From the list, select the storage node that you want to upgrade. Use

the CTRL key to select multiple storage nodes to upgrade from the

list.

5. Select the radio button: Install file on selected nodes one at a time

(Recommended).

6. Click Browse to navigate to the folder where you copied the patch

file.

7. Select the file and click Open Install File.

Focus returns to the Install Software window. When the file name

is present, the Install button becomes enabled.

8. Review the version and description to be sure that you are using

the correct upgrade file.

9. Click Install.

10. Select the check box to have the install messages automatically

scroll. These messages can be saved to a file.

(Optional) After the installation completes, click Save To File and

choose a name and location for the file.

11. Click Close when the installation on all the storage nodes is

completed.

Page 3