Hewlett-Packard StorageWorks 2/16 - SAN Switch Installation Manual
Download Installation manual of HP iPAQ 216 Cell Phone, Server for Free or View it Online on All-Guides.com.
Brand: HP
Category: Cell Phone , Server , Storage , Switch
Type: Installation manual for HP iPAQ 216
Pages: 100 (4.15 Mb)
Installing the SAN Switch 2/16
43SAN Switch 2/16 Version 3.1.2 Installation Guide
Connecting the Switch to the LAN
Execute the following procedure to connect the switch to the Ethernet Local Area
Network (LAN) segment.
1. Remove the shipping plug from the Ethernet port.
2. Connect one end of an Ethernet cable to the Ethernet port, see Figure 15.
Figure 15: Connecting the Ethernet cable
3. Connect the other end of the Ethernet cable to the workstation or to an
Ethernet network containing the workstation.
Note: You can now access the switch remotely (and from multiple connections), using
Telnet or the Web Tools application. Verify that the switch is not accessed from any
other connections during the remaining steps.
4. Log in to the switch with administrator privileges by Telnet. The default
administrator logon is admin and the default password is password.
SHR-2550A