Hewlett-Packard StorageWorks 2/16 - SAN Switch Installation Manual
Download Installation manual of HP iPAQ 216 Cell Phone, Server for Free or View it Online on All-Guides.com.
Brand: HP
Category: Cell Phone , Server , Storage , Switch
Type: Installation manual for HP iPAQ 216
Pages: 100 (4.15 Mb)
Installing the SAN Switch 2/16
48 SAN Switch 2/16 Version 3.1.2 Installation Guide
4. Connect the cables to the SFPs as appropriate to the fabric topology by
positioning each cable so that the key (the ridge on one side of the cable
connector) is aligned with the slot in the SFP, see Figure 16.
Figure 16: Inserting a cable into an SFP
Note: The cable is keyed so that it can only be inserted correctly into the SFP. If the
cable does not slide in easily, check the orientation.
Verifying Operation
After making the appropriate connections, as outlined in this chapter, follow these
steps to verify that the switch is running properly.
1. Access your browser.
2. At the URL address window, enter:
http://your switch IP address
3. If connected properly, the name of your switch appears (in green) at the
prompt, indicating Healthy/OK.
SHR-2549A