Hewlett-Packard StorageWorks 2/16 - SAN Switch Installation Manual
Download Installation manual of HP iPAQ 216 Cell Phone, Server for Free or View it Online on All-Guides.com.
Brand: HP
Category: Cell Phone , Server , Storage , Switch
Type: Installation manual for HP iPAQ 216
Pages: 100 (4.15 Mb)
Backing Up the Configuration and Upgrading Firmware
69SAN Switch 2/16 Version 3.1.2 Installation Guide
Restoring the System Configuration Settings
Follow these steps to restore the system configuration settings from a backup:
1. Verify that the RSHD service (on a UNIX machine) or the FTP service (on a
Windows or UNIX machine) is running on the host workstation.
2. Log in to the switch as the admin user.
3. Shut down the switch by issuing the switchDisable command.
4. At the command line, issue the following command:
configDownload "hostIPaddr", "user", "path_filename","password"
Where hostIPaddr is the IP address of the host computer, user is the user
ID used to log in to this computer, path_filename is the path location and
filename of the system configuration file, and password is the password for
the user ID specified.
Note: The password operand is required only if you are using FTP.
5. Reboot the switch by issuing the fastBoot command.
Upgrading or Restoring the Switch Firmware
The SAN Switch 2/16 ships with preloaded firmware. In most cases, there is no
need to update the firmware on the new switch. The firmware version can be
determined by:
■ The version command via Telnet
■ The Switch Management Application page in Web Tools
Follow these steps to upgrade or restore the switch firmware:
1. Verify that the RSHD service (on a UNIX machine) or the FTP service (on a
Windows or UNIX machine) is running on the host workstation.
2. Log in to the switch as the admin user.
3. At the command line, issue the following command:
firmwareDownload hostIPaddr, user, path_filename, password