Philips HTS8150/98 Quick Start Manual
Download Quick start manual of Philips HTS8140/75 Home Cinema speakers, Home Theater System for Free or View it Online on All-Guides.com. This version of Philips HTS8140/75 Manual compatible with such list of devices, as: HTS8140/75, HTS8140/93, HTS8140/98, HTS8150/98
Brand: Philips
Category: Home Cinema speakers , Home Theater System
Type: Quick start manual
Model: Philips HTS8140/75 , Philips HTS8140/93 , Philips HTS8140/98 , Philips HTS8150/98
Pages: 2 (1.48 Mb)
1
2
3
Enjoy
Need help?
User Manual
See the user manual that came with your Philips DVD Home Theater System.
DVD Home Theatre (SoundBar)
Remote Control
and 2 batteries
Wall mount bracket
and 2 knobs
Micro bre
cleaning cloth
Subwoofer
User
Manual
Register your product and get support at
www.philips.com/welcome
Quick Start Guide
HTS8140
HTS8150
What’s in the box?
Connect
Set up
Enjoy
1
2
3
2008 C Koninklijke Philips N.V.
All rights reserved.
12nc: 3139 245 30051
Power cable
EasyLink control
This feature is only applicable if this DVD Home Theatre
unit is connected to HDMI CEC compliant TV/device
using HDMI cable. It enables all the linked devices
response or react to certain commands simultaneously
with one touch control.
HDMI
HDMI CEC
TV
HDMI
AUDIO
AUDIO
A Turn on the HDMI CEC operations on your TV and
other connected devices. See TVs/devices manual for
details.
B You can now enjoy the EasyLink controls.
One touch play [ Auto Wake-up TV ]
A Press PLAY.
It turns on this unit and start disc play (if a video disc
is detected), and your TV automatically turns on and
switches to the correct viewing channel.
Note This is only possible if this unit is in standby
mode. If this unit is in active mode, you have to press
DISC followed by PLAY to start disc play.
One touch power off [ System Standby ]
A Press and hold 2.
It turns off all linked devices.
Note This unit responses to standby command from
other HDMI CEC compliant TV/devices.
One touch audio input switching
This unit is able to render the audio signals from the
active source and switch automatically to the
corresponding audio input.
Before you can enjoy this feature, connect audio cables
from this unit to your TV/devices and follow the
instructions below to map the audio inputs to the
connected devices.
A Press DISC.
B Press OPTIONS.
C Press B.
D Select
[ EasyLink ]
, then press B.
Screen Saver
DivX(R) VOD Code
Sleep Timer
Display Dim
Disc Lock
OSD Language
EasyLink
Standby Mode
General Setup
Auto Wake-up TV
System Standby
System Audio Control
Audio Input Mapping
E Select [ System Audio Control ] > [ On ], then
press OK.
F Select [ Audio Input Mapping ], then press OK.
G Select [ OK ] in the menu, then press OK to start
scanning of devices.
H When scanning complete, select the audio input of
this unit that is used to connect to your TV/device
(e.g. AUX1 Input), then press B.
I Select the TV/device (appeared in its brand name)
in the right panel, then press OK.
J
Repeat steps 8~9 to map other connected devices.
K To exit the menu, press OPTIONS.
Note Philips does not guarantee 100%
interoperability with all HDMI CEC compliant devices.
3.5mm stereo
audio cable
(for MP3 LINK)
Docking
station
HDMI cable
2 Composite
Video cables
AM/MW loop
antenna
subwoofer
Satellite Receiver /
Cable Box
HDD / DVD Recorder