• Home
• Brands
• Hitachi Manuals
• Hitachi CP-WX1100
• Hitachi CP-WX1100 Using Manual

Hitachi CP-WX1100 Using Manual

Download Lens replacement manual of Hitachi CP-WX1100 Camera Lens, Projector for Free or View it Online on All-Guides.com.

1

2

3

4

5

6

7

8

9

10

11

12

QR77621A

6. Attaching the lens (2)

Support the lens installed in the LCD

projector and move the lock lever on the

projector as far as it will go to the right

(until the lock lever clicks into the locked

position).

Caution:

■ To prevent the lens from falling off,

after attaching the lens, check that

it is securely mounted and that the

lock lever does not move.

Lens Replacement Manual

■ Lens replacement should be performed by a service engineer.

■ When changing the lens, place the LCD projector right way up on a horizontal surface. Do not change the lens with the projector facing upwards or downwards or when

the projector is suspended.

Attaching the SD-804/LL-805/UL-806 Lens When Unpacking the LCD Projector

1. Preparing to attach the lens (1)

Take the lens adapter supplied with the

LCD projector and mount it so that the

connector on the lens is aligned with the

socket of the lens adapter.

Caution:

■ Be careful not to touch the surface

of the lens.

■ Do not touch the socket of the lens

adapter or subject it to impact as

this may lead to malfunction.

■ Do not hold the lens by the lens

shade as this may lead to injury or malfunction.

■ Be sure to remove the tape fi xing the hexagonal screw on the lens.

■ Be sure to remove the lens cap. Installing the lens in the LCD projector with the

lens cap on may lead to malfunction.

2. Preparing to attach the lens (2)

Using the hexagon wrench supplied

with the LCD projector, attach the lens

adapter with the four hexagon screws on

the lens.

Connect the connector on the lens to the

socket of the lens adapter.

3. Preparing to attach the lens (3)

Unscrew the front ring from the LCD

projector and remove the cap.

4. Preparing to attach the lens (4)

Lift off the front cover to remove it.

5. Preparing to attach the lens (1)

Make sure that the terminal on the lens

and the terminal on the LCD projector are

aligned.

Support the lens with the lens adapter

attached and install it in the LCD

projector so that the adapter rib fi ts into

the groove of the projector.

Caution:

■ Do not hold the lens by the lens

shade as this may lead to injury or

malfunction.

■ Take care to avoid hitting the surface of the lens on the LCD projector when

attaching the lens as this may lead to malfunction.

7. Assembling the main unit parts (1)

Insert the two catches on the front cover

into the LCD projector body to attach the

front cover.

8. Assembling the main unit parts (2)

Have the blind sheet supplied with the

lens ready and mount it on the lens

shade.

Mount the blind sheet with its matte side

facing out.

9. Assembling the main unit parts (3)

Screw on the front ring.

Caution:

■ Take care not to get the blind sheet

trapped when fi tting the front ring

as this may lead to malfunction.

10. Lens attachment is completed.

Attaching the USL-801/SL-802/SL-803 Lens When Unpacking the LCD Projector

1. Lens attachment is completed.

Follow the procedures in step 1 through

step 6 for Attaching the SD-804/LL-805/

UL-806 Lens and install the lens in the

LCD projector.

3. Attaching the optional parts (2)

(SL-802/SL-803 only)

Rotate the attached blinder to the

underside of the lens and mount the

second blinder on the lens shade in the

same way.

Engage the two catches on these

blinders.

4. Assembling the main unit parts (1)

Insert the two catches on the front cover

into the LCD projector body to attach the

front cover.

5. Assembling the main unit parts (2)

Screw on the front ring.

Caution:

■ Take care not to get the blind sheet

trapped when fi tting the front ring

as this may lead to malfunction.

6. Attaching the optional parts (3)

(SL-802/SL-803 only)

Have the two protectors supplied with the

lens ready and insert the fi rst protector

between the front ring and the lens.

7. Attaching the optional parts (4)

(SL-802/SL-803 only)

Rotate the attached protector to the

underside of the lens and insert the

second protector in the same way

between the front ring and the lens.

Engage the two catches on the protector.

8. Lens attachment is completed.

2. Attaching the optional parts (1)

(SL-802/SL-803 only)

Have the two blinders supplied with the

lens ready and mount the fi rst blinder on

the lens shade.

Socket

Connector

Hexagon wrench

Front cover

Cap

Front ring

Terminal on projector

Terminal on lens

Lens shade

Groove

Rib

Lock lever

Lock lever

Front cover

Catch

Catches

Blind sheet

Lens shade

Front ring

Front cover

Catch

Catches

Front ring

Catch

Blinder

Protector

Front ring

Catch

Protector

Lens adapter

Socket

Connector

Lens shade

ENGLISH

Blinder

Lens shade

Caution:

■ When using the USL-801 lens, the

edges of the projected image may

appear dark or shadows may be visible.

If this happens, use the lens shift

function to adjust the position of the

projected image.