• Home
• Brands
• Hitachi Manuals
• Hitachi CP-WX1100
• Hitachi SD-804 User's Manual

Hitachi SD-804 User's Manual

Download Operation & user’s manual of Hitachi CP-WX1100 Camera Lens, Projector for Free or View it Online on All-Guides.com. This version of Hitachi CP-WX1100 Manual compatible with such list of devices, as: CP-WX1100, LL-805, SD-804, SL-802, USL-801

1

2

3

4

5

6

QR77501C

ENGLISH

Optional Lens USER’S MANUAL

SAFETY INSTRUCTIONS

CAUTION

The distance of projection may not allow focusing on the peripheral

area of the screen. Adjust the focus to keep the center and the

peripheral area of the screen balanced.

This specifi cations are subject to change without notice.

The zoom lens may cause some distortion of the image on the screen

depending on the zoom position.

Distortion may appear on screen if the keystone correction (trapezoidal

distortion correction) is overly adjusted.

Keystone correction (trapezoidal distortion correction) may be limited

with some lenses.

To maintain a certain level of image quality, depending on the lens

model, the adjustable range of the focus and zoom is limited. As a

result, the area around the upper or lower limit of the dialog in the

projected image is not displayed in maximum zoom, but this is not a

malfunction.

Information for users applicable in European Union countries

This symbol on the product or on its packaging means that your

electrical and electronic equipment should be disposed at the end

of life separately from your household wastes. There are separate

collection systems for recycling in EU. For more information,

please contact the local authority or the dealer where you

purchased the product.

Important Safety Instructions

(Always follow these instructions.)

Please read this section on important safety instructions before replacing

the projector lens.

To prevent accidents during lens replacement and ensure product safety after

replacing the lens, be sure to follow the safety instructions described herein.

●

These symbols indicate actions that can result in injury or damage if

these operations are not followed correctly.

Warning

This symbol indicates that there is a possibility of serious

injury or even death if the operation is not followed correctly.

Caution

This symbol indicates that there is a possibility of physical injury

or damage to equipment if the operation is not followed correctly.

●

These symbols indicate the types of precautions that must followed.

This symbol indicates that

caution must be taken.

This symbol warns of possible

high heat.

This symbol warns of possible

electrical shock.

This symbol indicates an action that

must not be performed.

■

Before replacing the lens, be sure to turn off and

unplug the LCD projector, and allow at least 45

minutes for the projector to fully cool.

Before replacing the lens, be sure to turn off and unplug the LCD

projector, and allow at least 45 minutes for the projector to fully

cool

.

■

When attaching, take care so that dust not enter

inside.

Continued use with dust inside may result in fi re or electric

shock.

■

Do not replace the lens while the projector is

suspended from the ceiling.

This can cause injury.

Important Operation Instructions

Warning

■

Before replacing the projector lens, be sure to read

this manual and the operation manual of the LCD

projector for use with this lens.

To ensure safe operations and the continued safety of this

product, be sure to follow all of the safety instructions written in

this manual and the operation manual of the LCD projector.

■

Do not place the lens in a location subject to direct

sunlight or other strong lighting or near heat-radiating

equipment.

This can cause a fi re due to the properties of the lens. It can

also cause injury or damage to the lens.

■

Do not subject the lens to shocks.

This can cause injury or damage to the lens.

■

Be sure to unplug the LCD projector before replacing

the lens.

The inside of the LCD projector has areas of high voltage which

can cause electrical shock.

■

Do not touch the fan of the LCD projector during

operation.

This can cause injury.

Warning

For safety, do work in accordance with the

Exchange Manual to install this product.

Please read this manual and manuals for the

LCD projector to be used thoroughly to ensure

correct usage through understanding.

Incorrect usage could result in fire, an injury or

damage.

Do not give any shock or impact.

Any shock or impact could result in an injury or

damage. The lens part is projected. Take care not

to strike it.

NOTE

Take care of the lens.

When transporting the LCD projector, be sure to remove the lens.

Otherwise it could result in damage.

When transporting the lens, protect the lens by attaching the lens cap.

Do not touch the lens to prevent fog or dirt of the lens that cause

deterioration of display quality.

Do not touch the lens directly with your hands or fi ngers.

This can dirty the lens and cause deterioration in image quality.

The lens is a precision optical device. Carefully handle the lens

without subjecting it to shocks or vibrations.

When resting the lens on a surface, place the lens face down on a soft

cloth.

Cleaning

Use commercially available lens tissue to clean the lens (used to clean

cameras, eyeglasses, etc.).

Excepting for lens, use a soft cloth to clean. When excessively soiled

dilute a neutral detergent in water, wet and wring out the soft cloth.

Do not use detergents or chemicals other than those noted above (e.g.

benzene or thinners).

OPERATIONS

Project an image as described in the LCD Projector user's manual, and

adjust the size and focus of the projected image.

See the Projection Distance table in this user's manual for information

on optional lens projection distances.

Caution

■

When replacing the lens, do not touch the LCD panels or

polariz-ing plates of the LCD projector or subject them to

shocks.

This can cause damage to the equipment. It can also cause

a misalignment of the optical adjustment and, therefore,

require readjustments.

■

When replacing the lens, be careful not to damage the

connectors or wires inside the LCD projector.

This can cause damage to the equipment. Be careful not to pull

on the connectors or wires or get them caught in the circuit board

or case.

Replacing the Lens

The lens should be replaced by authorized service personnel.

Refer to the Replacement Manual for the replacement.