Hotpoint HDA2000G Specification
Download Dimensions and installation information of Hotpoint HDA2000G Dishwasher for Free or View it Online on All-Guides.com. This version of Hotpoint HDA2000G Manual compatible with such list of devices, as: HDA2000G, HDA2000GAA, HDA2000GBB, HDA2000GCC, HDA2000GWW
Brand: Hotpoint
Category: Dishwasher
Type: Dimensions and installation information
Model: Hotpoint HDA2000G , Hotpoint HDA2000GAA , Hotpoint HDA2000GBB , Hotpoint HDA2000GCC , Hotpoint HDA2000GWW
Pages: 2 (0.05 Mb)
Download Hotpoint HDA2000G Dimensions and installation information
1
2
Specification Created 1/02
HDA2000G - Hotpoint Built-In Dishwasher
Dishwasher Dimensions (in inches)
Wood Insert Cut-Out
Dimensions (in inches)
Installation Information
(in inches)
Note: Dishwasher must not be installed more than 10' from sink
for proper drainage. All plumbing and electrical work must be in
accordance with local codes. Dishwasher includes drain hose
and leveling legs.
Installation Information: Before installing, consult installation
instructions packed with product for current dimensional data.
Electrical Rating
Voltage AC.......................................................120
Hertz ..................................................................60
Total connected load amperage.......................8.6
Calrod
®
heater watts.......................................500
For use on adequately wired 120-volt, 15-amp
circuit having 2-wire service with a separate
ground wire. This appliance must be grounded
for safe operation.
R
Listed by
Underwriters
Laboratories
This wall area
must be free of
pipes or wires
Countertop
4
6
Hot
water
line on
left
44
2
Plumbing and electrical
service must enter
inside shaded area
24" From wall
24" MIN.
90°
19" MIN. from wall
24"
MIN.
6
34-1/2±1/4"
Underside
of countertop
to floor
55
90°
Electrical
wiring on
right
Electrical
wiring is
3" from
cabinet
24
25-3/4
MAX.
21-1/2
3-1/4
4 (Adjustable)
34 MIN.
adj. to 35
24-3/4
23-3/8*
C
B
Access insert
Detail D
Panel Thickness
Door insert
Front
of
Panel
A
1-1/2
1/2
1/4
3/4
Panel
Models/Kits A B C Thickness
GPF325 Kit 18-7/8” 23-9/16” 3-11/16” 1/4”
3-3/4” to
GPF375 Kit 18-15/16” 23-5/8”* 4-1/4”** 3/4”
*Bottom of panel must be notched 1-1/2" x 1/2" to clear
access panel. (See illustration above)
**Adjustment required to match adjcent cabinets fronts due to
leveling leg adjustment, 4" nominal.
As an ENERGY STAR
®
Partner,
GE has determined that this product
meets the ENERGY STAR
®
guidelines for energy efficiency.