HP CC487-91209 Fax Manual
Download Fax manual of HP CC487-91209 Accessory for Free or View it Online on All-Guides.com.
Fax settings
The following sections detail the various settings for sending and receiving faxes.
●
Send fax settings
●
Receive fax settings
●
Fax archive and forwarding
Send fax settings
Use the Fax Send Setup menu to configure the following features:
●
Fax dialing settings
●
General fax settings
●
Default job options
Fax dialing settings
Set the modem volume
1. On the control panel, scroll to and touch the Administration icon to open the Administration
menu.
2. Scroll to and touch Initial Setup to display the Initial Setup menu.
3. Touch Fax Setup to display the Fax Setup menu.
4. Touch Fax Send Settings to display the Fax Send Settings menu.
5. Touch Fax Dial Volume to display the Fax Dial Volume menu.
6. Touch Off; Low (default), or High to set the volume.
7. Touch Save to save the volume setting.
Set the dialing mode
The dialing mode setting sets the type of dialing that is used: either tone (touch-tone phones) or pulse
(rotary-dial phones).
To set the dialing mode, perform the following steps.
1. On the control panel, scroll to and touch the Administration icon to open the Administration
menu.
2. Scroll to touch Initial Setup to open the initial setup menu.
3. Touch Fax Setup to open the fax setup menu.
4. Touch Fax Send Settings and use the down arrow key to scroll to Dialing Mode.
5. Touch Dialing Mode to see the dialing mode settings.
6. Touch Tone (default) to set the fax for tone dialing, or touch Pulse to set the fax for pulse dialing.
7. Touch Save.
16 Chapter 2 HP Color LaserJet CM3530 MFP Series ENWW