HP CC487-91209 Fax Manual
Download Fax manual of HP CC487-91209 Accessory for Free or View it Online on All-Guides.com.
Default job options
The following default job options are available for configuration:
●
Notification
●
Stamp Received Faxes
●
Fit to Page
●
Paper Selection
●
Output Bin
●
Sides
NOTE: Default job option settings are shared across all fax methods; analog, LAN, and internet fax.
Change notification settings
Notification selects when and how you are notified of the status of an outgoing fax. This setting
applies to the current fax only. To change the setting permanently, change the default setting.
1. On the control panel, touch the Fax icon to open the Fax screen.
2. Touch More Options.
3. Touch Notification.
4. Select a notification setting:
●
Touch None to turn off notification.
●
Touch This job to enable notification for the current job.
●
Touch On error to enable error notification only for the current job.
5. Touch Print to receive a printed notification, or touch E-mail to receive an e-mail notification.
6. If you selected Print, touch OK to complete the notification setup.
-or-
If you selected E-mail, use the keyboard to type an e-mail address. Then touch OK to complete
the notification setup.
Stamp received faxes (incoming faxes)
The stamp received faxes setting enables or disables stamping incoming faxes. The stamp prints the
received date, time, phone number, and page number on each incoming page.
1. On the control panel, scroll to and touch the Administration icon to open the Administration
menu.
2. Touch Default Job Options and then Default Fax Options.
3. Touch Fax Receive to see the Fax Receive setting.
4. Touch Stamp Received Faxes to see the settings.
30 Chapter 2 HP Color LaserJet CM3530 MFP Series ENWW