Embedded Web server
The embedded Web server provides a convenient way to manage your printer on a network.
The embedded Web server is available for the HP LaserJet 1022nw printer over the Internal
HP network connection. The following information applies to the embedded Web server:
● You do not need to install any software on the computer. You only need to have a
supported Web browser. To use the embedded Web server, you must have Microsoft
Internet Explorer 5.5 or later or Netscape Navigator 6.0 or later.
● The embedded Web server is available in English only.
● The embedded Web server does not provide e-mail or status alerts.
The embedded Web server allows you to view printer and network status and to manage
printing functions from your computer instead of from the printer control panel. The following
are examples of what you can do using the embedded Web server:
● View printer status information
● Order new supplies
● View and change the printer default configuration settings
● View and change the printer’s wired -or wireless network settings
The embedded Web server works when the printer is connected to an IP-based network.
The embedded Web server does not support IPX-based printer connections or AppleTalk.
NOTE
Internet access is not required to open and use the embedded Web server. However, if you
click a link in the Other Links area, you must have Internet access in order to go to the site
associated with the link.
CAUTION
It is recommended that the printer and associated computers reside on the same subnet.
Printer installation across subnets can be problematic depending on the type of router used.
However, if the printer is on a different subnet than your computer, enter the printer's IP
address (for example, http://192.168.1.1) in the browser's Address fields to open the
embedded Web server. Also, if your computer uses a proxy server to access the Internet,
you might need to configure your browser to by-pass the proxy server in order to access the
embedded Web server.
To open the embedded Web server
1. In a supported Web browser, type the IP address or hostname for the printer. To find the
IP address, print a configuration page at the printer by pressing and holding the G
O
button until the Ready light starts blinking.
NOTE
Once you open the URL, you can bookmark it so that you can return to it quickly in the future.
2. The embedded Web server has three tabs that contain settings and information about
the printer: the Information tab, the Settings tab, and the Networking tab. Click the tab
that you want to view.
ENWW Embedded Web server 13
