Installation options
The HP LaserJet 1022 printing-system software can be used in the following configurations:
■ You install the HP LaserJet 1022 printing-system software on a computer that is directly
connected to the product through a USB port. On Windows systems, you can share your
HP LaserJet 1022 Series printer with other users on your network.
■ The HP LaserJet 1022 Series printer is directly connected to a computer and you install only the
printer driver.
■ You install the HP LaserJet 1022 printing-system software on a computer that has access to a
local area network (LAN). The HP LaserJet 1022n and HP LaserJet 1022nw printers connect to
a LAN through an internal HP network port.
HP recommends that you install the software before connecting the product to the computer
(software-first installation). However, if the product is already connected to the computer, you can
install the software by using the Plug-n-Play method or by using the Add Printer Wizard. For more
information, see
Plug-n-Play and Add Printer Wizard.
Windows installation for direct connections
Use the following instructions to install the product software on a computer that is running Windows
98 SE, Windows Me, Windows 2000, or Windows XP (32-bit only).
NOTE Set up and turn on the product before installing the printing-system software. Do not
connect the product to the computer until the software installation program prompts you to do
so.
NOTE You must have administrator privileges to install the printing-system software on
Windows 2000 or Windows XP.
1 Close all of the programs that are open on the computer.
2 Insert the HP LaserJet 1022 printing-system software CD into the CD-ROM drive.
NOTE If your CD does not start automatically, click Start, click Run, and then browse to
and double-click the SETUP.EXE file in the root directory of the CD.
3 Click Next and follow the onscreen prompts.
4 When the installation is nearly complete, the Finish dialog box appears and you can print a test
page. Click the Print Test Page check box, and then click Finish to finish the installation and
print a test page.
5 If you are prompted to restart your computer, click Yes.
Setting up Windows sharing (peer-to-peer networking)
NOTE This section describes procedures for sharing a product using Microsoft Windows
Sharing (peer-to-peer networking). Peer-to-peer networking is a feature of Microsoft operating
systems, not of HP print drivers. If these procedures are not successful, or for more
information about peer-to-peer networking procedures, contact Microsoft at the following Web
site:
www.microsoft.com
ENWW Installation options 89
Windows software
installation
