Audio Authority 805-016 (3A), 805-022 (3A), 805-025 (10A) Installation

Download Installation of Audio Authority 805-016 (3A), 805-022 (3A), 805-025 (10A) Power Supply for Free or View it Online on All-Guides.com.

Audio Authority 805-016 (3A), 805-022 (3A), 805-025 (10A) Installation - Page 1
1
752-240
2/02
2048 Mercer Road, Lexington, Kentucky 40511-1071
Phone: 859/233-4599 • Fax: 859/233-4510
Customer Toll-Free USA & Canada: 800/322-8346
Website: http://www.audioauthority.com
Power Supply Instructions
Models 805-016 (3A) 805-022 (3A) and 805-025 (10A)
Installation
These power supplies are filtered and regulated at 13.8 volts DC. They
are particularly suited for audio/video applications in indoor environments.
The Wall Mounting Bracket
If mounting on a wall or other vertical surface is desired, remove the two
rubber feet closest to the output terminals and use the screws to install
the mounting bracket in the holes where the feet were attached. Use the
two larger screws provided to hang the power supply on a vertical surface
such as wood or metal. Metal anchors will be required if the supply is to
be mounted on a drywall surface.
Grounding
Equipment powered by this supply receives an earth ground through the wire connecting the black negative output
terminal and the chassis, which is earth grounded through its power cord.
752-240
2/02
2048 Mercer Road, Lexington, Kentucky 40511-1071
Phone: 859/233-4599 • Fax: 859/233-4510
Customer Toll-Free USA & Canada: 800/322-8346
Website: http://www.audioauthority.com
Power Supply Instructions
Models 805-016 (3A) 805-022 (3A) and 805-025 (10A)
Installation
These power supplies are filtered and regulated at 13.8 volts DC. They
are particularly suited for audio/video applications in indoor environments.
The Wall Mounting Bracket
If mounting on a wall or other vertical surface is desired, remove the two
rubber feet closest to the output terminals and use the screws to install
the mounting bracket in the holes where the feet were attached. Use the
two larger screws provided to hang the power supply on a vertical surface
such as wood or metal. Metal anchors will be required if the supply is to
be mounted on a drywall surface.
Grounding
Equipment powered by this supply receives an earth ground through the wire connecting the black negative output
terminal and the chassis, which is earth grounded through its power cord.