HP 3100 User Manual
Download Operation & user’s manual of HP 3110 All in One Printer, Desktop for Free or View it Online on All-Guides.com.
Brand: HP
Category: All in One Printer , Desktop , Fax Machine , Laptop , Printer
Type: Operation & user’s manual
Model: HP 3110 , HP LASERJET 3100 , HP 3100C
Pages: 166 (12.54 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
The HP All-in-One prints a report with the results of the test. If the test fails, review the
report for information on how to fix the problem and rerun the test.
To test your fax setup from the control panel
1. Set up your HP All-in-One for faxing according to the setup instructions in this
chapter.
2. Insert the ink cartridges and load full-size paper in the main tray before starting
the test.
For more information, see Replace the ink cartridges and Load full-size paper.
3. Press Setup.
4. Press 5, then press 8.
This displays the Tools menu and then selects Run Fax Test.
The HP All-in-One displays the status of the test on the color graphics display
and prints a report.
5. Review the report.
– If the test passes and you are still having problems faxing, check the fax
settings listed in the report to verify the settings are correct. A blank or
incorrect fax setting can cause problems faxing.
– If the test fails, review the report for more information on how to fix any
problems found.
6. After you pick up the fax report from your HP All-in-One, press OK.
If necessary, resolve any problems found and rerun the test.
For more information on resolving any problems found during the test, see The
fax test failed.
Set the fax header
The fax header prints your name and fax number on the top of every fax you send. HP
recommends that you set up the fax header by using the Fax Setup Wizard
(Windows users) or the Fax Setup Utility (Mac users) during the HP Image
Zone software installation. You can also set up the fax header from the control panel.
Note 1 In some countries/regions the fax header information is a legal
requirement.
Note 2 In Hungary, the subscriber identification code (fax header) can be set
or changed only by authorized personnel. For more information, contact your
authorized HP dealer.
1. Press Setup.
2. Press 3, and then press 1.
This displays the Basic Fax Setup menu and then selects Fax Header.
3. Enter your personal or company name.
For information on entering text from the control panel, see Text and symbols.
4. When you are finished entering your personal or company name, select Done on
the visual keyboard, and then press OK.
5. Enter your fax number by using the numeric keypad.
6. Press OK.
Chapter 3
52 HP Photosmart 3100 All-in-One series
Finish setup