HP 6000 Service Manual
Download Service manual of HP 6100 All in One Printer, Antenna for Free or View it Online on All-Guides.com.
Brand: HP
Category: All in One Printer , Antenna , Desktop , Laptop , Network Router , Printer , Server , Storage
Type: Service manual
Model: HP 6100 , HP Officejet 6000 , HP OmniBook 6000
Pages: 114 (2.88 Mb)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
3-10 Troubleshooting and Diagnostics HP Omnibook 6000/6100
Symptom Call Center:
Suggestions
Repair Center:
Likely Causes
Repair Center:
Comments
Floppy drive
General problems. Make sure floppy drive
module is installed or
connected correctly.
Try using alternate
connection (with or without
floppy cable).
Check settings in BIOS
Setup.
Floppy drive module
or contacts.
External floppy drive
cable.
Motherboard.
Floppy drive does
not work as 3-mode
drive.
3-mode drive is not
supported when the drive is
connected to a dock.
External floppy drive
cable.
Floppy drive module.
Keyboard
Some or all keys do
not work properly.
Check settings in BIOS
Setup.
Keyboard.
Power supply PCA.
Motherboard.
Try reinserting the flex cable
in the connector on the
power supply PCA.
PS/2 keyboard and
mouse with Y-
adapter do not
work.
Check devices separately. Y-adapter.
PS/2 device.
Motherboard.
Pointing stick
General problems. Slide and hold the power
button four seconds to reset
the computer.
Check settings in Control
Panel. Make sure pointing
stick is enabled in Mouse
Properties.
Make sure the pointing stick
is enabled in BIOS Setup.
Keyboard.
Power supply PCA.
Motherboard.
Try reinserting the flex cable
in the connector on the
power supply PCA or
motherboard.
Special pointing
stick features not
working.
In Mouse Properties, select
the Synaptics PS/2
TouchPad driver. (The driver
is installed from the directory
\hp\Drivers\Touchpad.)
Keyboard assembly.
Power supply PCA.
Motherboard.
Touch pad
General problems. Slide and hold the power
button four seconds to reset
the computer.
Check settings in Control
Panel. Make sure touch pad
is enabled in Mouse
Properties.
Make sure the touch pad is
enabled in BIOS Setup.
Check pointing stick settings
in Control Panel.
Top case.
Power supply PCA.
Motherboard.
Special touch pad
features not
working.
In Mouse Properties, select
the Synaptics PS/2
TouchPad driver. (The driver
is installed from the directory
\hp\Drivers\Touchpad.)
Top case.
Motherboard.
Click button does
not work.
Top case.
Motherboard.