HP DeskJet 300 series Technical Support Information
Download Technical support information of Dell DeskJet 300 series All in One Printer, Calculator for Free or View it Online on All-Guides.com.
Category: All in One Printer , Calculator , Desktop , Digital Camera , Printer , Switch
Type: Technical support information
Model: Dell DeskJet 300 series , HP Deskjet 320 , HP DeskJet 300 series
Pages: 202 (2.22 Mb)
Download Dell DeskJet 300 series Technical support information
Problem Resolution 6-13
Table 6-5. HP DeskJet 340 Printer Light Indicatons
Printer Light Indication Probable Cause Solution
The Power light is blinking
The computer is sending data to
the printer.
You do not need to do anything.
The Paper feed light is
blinking
The printer is out of paper.
The paper is not properly
loaded.
Load paper into the sheet feeder.
Push the paper release lever down and reposition paper.
Push the paper release lever up and press the Paper Feed
button to continue printing.
The Change Cartridge light is
blinking
The printer is waiting for you to
change the print cartridge.
Install a print cartridge. See “Installing a Print Cartridge ”
in chapter 3.
The Charge light is blinking
and the Power light is on
The battery charge level is low. Connect the power adapter to charge the battery pack.
The Charge light blinks
alternately with the other
lights.
There is a problem with the
battery.
• Discharge the battery pack completely and charge it
again.
• Make sure you have installeda recommended battery
pack.
• Make sure that the battery pack is properly seated in
the battery compartment.
• Clean the battery pack contacts.
• If the problem persists, replace the battery pack.
All four printer lights are
blinking at the same time.
There is a problem with the
printer.
• Turn the printer off and then turn it on again.
• If the lights still blink, press and hold the Paper Feed
button and locate the light pattern shown in this table.
The Paper light is on
Paper is jammed in the printer. Turn off the printer and remove trapped sheet of paper.
See “Troubleshooting Paper Feed Operations” in this
chapter.
The Change Cartridge light is
on
• The movement of the print
cartridge may be blocked.
• The automatic cradle lock
may not have been released
if the print cartridge cradle is
in the “home” position and
there is no object blocking its
path.
Turn off the printer. Open the access door and remove any
object blocking the movement of the print cartridge
cradle.
You may have to return your printer for servicing.
The Change Cartridge and
Paper Feed lights are on.
The print cartridge may be
jammed.
Open the access door. Gently push or tap the print
cartridge cradle against the end of the printer.
The Paper Feed and Power
lights are on
or
The Change Cartridge and
Power lights are on
An internal printer error has
occurred.
• Turn off the printer power and turn on again.
• If this does not work, unplug the power adapter and
remove the battery pack. Plug in the power adapter
and turn on the printer.
• Return the printer for servicing if this does not work.
The Change Cartridge, Paper
and Power lights are on
An internal error has occurred. Return your printer for servicing.