HP DeskJet 300 series Technical Support Information
Download Technical support information of Dell DeskJet 300 series All in One Printer, Calculator for Free or View it Online on All-Guides.com.
Category: All in One Printer , Calculator , Desktop , Digital Camera , Printer , Switch
Type: Technical support information
Model: Dell DeskJet 300 series , HP Deskjet 320 , HP DeskJet 300 series
Pages: 202 (2.22 Mb)
Download Dell DeskJet 300 series Technical support information
3-2 Operation and Usage
Printer Buttons and Lights
Figure 3-1. HP DeskJet 340 Printer Buttons and Lights
Table 3-1. Description of Printer Buttons and Lights for the HP DeskJet 340
Button or Light Operation Description
Power button and
light
Turns the printer on
or off
Press the Power button to turn the printer on or off. The power light blinks when
the printer is receiving information from the computer or when printing.
Paper Feed
button and light
Loads and ejects
paper
The Paper Feed light blinks when the printer is out of paper Load paper in the
paper tray and press the Paper Feed button to continue. To eject paper, press
and hold the button.
Starts the printer
self-test
Turn off the printer. Then, while pressing the Paper Feed button, press and
release the Power button. See “Printer Self-Test” in chapter 6.
Change Cartridge
button and light
Replaces the
cartridge
The Change Cartridge light blinks when the printer is waiting for you to change
the print cartridge. Press to move the print cartridge cradle to the middle of the
printer where you can change the print cartridge. Press again to return the
cradle to the right side of the printer.
Charge light
Identifying printer
status when using a
battery pack
(battery mode only)
The Charge light indicates the following:
• The Charge light is lit when the battery pack in the printer is being charged.
• The Charge light blinks when the printer is discharging the battery pack.
• If the Charge light is off, either the battery pack in the printer is fully charged
or there is no battery pack in the printer.
+
Press to move the print cartridge
cradle to the loading position, or to
return it to the ‘home’ position.
Press and hold to
eject paper.
Press to turn the printer on or off.