HP DeskJet 300 series Technical Support Information
Download Technical support information of Dell DeskJet 300 series All in One Printer, Calculator for Free or View it Online on All-Guides.com.
Category: All in One Printer , Calculator , Desktop , Digital Camera , Printer , Switch
Type: Technical support information
Model: Dell DeskJet 300 series , HP Deskjet 320 , HP DeskJet 300 series
Pages: 202 (2.22 Mb)
Download Dell DeskJet 300 series Technical support information
Operation and Usage 3-17
Loading Media
Manual Single Load
1. The older model C2614A of the HP DeskJet Portable printer does not have a “Media Source” group in its printer settings menu.
You can only select “Manual Feed” in the software application’s printer settings, or with the DJPMenu configuration utility (see footnote 2
below).
2. The HP DeskJet Portable printer does not have the DJPMenu software included with the printer; to get this software, see “Obtaining Printer
Drivers” in chapter 7, Service and Support Information. For more information on DJPMenu, see “Additional Configuration Options with the
DJPMenu Configuration Utility” in chapter 2.
Note The HP DeskJet 300 Series printers are designed to work with
cut-sheet paper and media only
. If
continuous Z-fold paper is loaded into the printer — whether you are using the sheet feeder or loading
the paper feed slot by hand — the printer will detect a paper jam error and will not operate properly.
1. Insert a sheet of media into the paper-feed slot with the
edge of the paper against the alignment mark.
Make sure
that the print side is up.
Wait one second for the printer to
grab the sheet of paper.
2. Let go of the sheet once the printer grips it and pulls it into
the printer. The printer will print on this sheet and eject it.
3. If the print job requires another sheet, the Online light will
blink to indicate that the printer is out of paper. Insert a
sheet into the paper-feed slot as described in step 1.
Notes • Feed sheets into an HP DeskJet 300 Series printer with the print side
up
. Note that this is different
from what the desktop printers in the DeskJet 500 Series printer family require.
• If the user expects to be feeding media manually for a large number of sheets, or if the user does not
own a sheet feeder, make sure that Manual Feed
1
has been specified — either in the MEDIA
SOURCE
1
group in Menu mode, or with the DJPMenu configuration utility, or through the software
application. If you specify Manual Feed, the motor will turn on for only half a second to pick up a sheet
of paper. That is enough time to catch a hand-fed sheet but not enough time to catch one from the
sheet feeder.