HP DeskJet 300 series Technical Support Information
Download Technical support information of Dell DeskJet 300 series All in One Printer, Calculator for Free or View it Online on All-Guides.com.
Category: All in One Printer , Calculator , Desktop , Digital Camera , Printer , Switch
Type: Technical support information
Model: Dell DeskJet 300 series , HP Deskjet 320 , HP DeskJet 300 series
Pages: 202 (2.22 Mb)
Download Dell DeskJet 300 series Technical support information
Operation and Usage 3-25
A partially charged battery pack
has been newly installed in the
printer
Standard charge If a partially charged battery pack is installed in the printer,
the printer cannot determine the present charge level of the
battery pack.
The printer reports this battery pack’s charge level as
1
/
4
charged on the battery level gauge and charges it at the
standard charge rate.
When the battery pack has been fully charged, the printer
makes sure the battery pack remains fully charged by
charging it at the maintenance rate as needed.
Battery pack is new
Charge rate depends
on the residual
charge level in the
battery pack
• If the printer detects a residual charge level in the battery
pack, the printer will charge the battery pack at the
standard charge
rate.
• If the printer fails to detect a residual charge in the battery
pack — that is, the battery pack is fully discharged — the
printer will
quick charge
the battery pack.
Notes • The printer stops charging the battery during printing, even though the Charge light remains lit.
Once the printer finishes printing, it resumes charging the battery. If you are printing while
charging a battery pack, the time to charge the battery pack will be longer than if you are not
printing.
• To override the standard charge rate and set the printer to the quick charge rate, see “Configuring
the Printer” in chapter 2.
Table 3-7. Battery Pack Charge Rates (Continued)
Battery Pack Situation Charge Rate Explanation