HP CD-WRITER Plus User's Manual
Download Operation & user’s manual of HP CD-WRITER Plus CD/CDR Drive, Recording Equipment for Free or View it Online on All-Guides.com.
Brand: HP
Category: CD/CDR Drive , Recording Equipment
Type: Operation & user’s manual for HP CD-WRITER Plus
Pages: 38
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
20
Recovering Your Data
Test successful. To continue your recovery,
select RECOVER.
If you are testing, select EXIT.
9. To continue recovering your system, press F5.
Or,
To exit the Disaster Recovery process, press F10, remove any diskettes or
CDs from your drive(s) and restart your computer.
WARNING: If you are just performing a test of your Disaster Recovery Set, the
test is now complete. Do not continue past this step. Please remove any
diskettes and CDs from your drive(s) and restart your computer.
The following message should appear:
Select the volume that you wish to recover.
Drive C: [Volume C Name]
Drive D: [Volume D Name]
NOTE: If you have only one drive, it will be automatically selected for recovery
and this screen will not be displayed.
10. Select the volume that you wish to recover by highlighting the volume
using the Up and Down arrow keys, then pressing Enter.
You will then be asked to confirm your selections before recovering your
information.
11. Press Enter
to confirm your selections, or press Esc
to return to the
previous screen(s) and make a different selection.
NOTE: If Disaster Recovery CD #1 is not in your HP CD-Writer Plus, you will
be prompted to insert it at this time.
HP Disaster Recovery will now begin recovering your system.
The recovery process will take some time to complete, depending upon
the amount of data you are recovering. You will be prompted to insert
the CDs in the order they were created.
12. Once the volume has been recovered, a summary of the process will be
displayed. To exit this screen, press Enter. If there is more than one
volume to be recovered, you may select it at this time.