HP F1197A User's Manual

Download Operation & user’s manual of HP F1197A CD/CDR Drive for Free or View it Online on All-Guides.com.

Brand: HP

Category: CD/CDR Drive

Type: Operation & user’s manual for HP F1197A

Pages: 21

Download HP F1197A Operation & user’s manual

HP F1197A Operation & user’s manual - Page 1
1
HP F1197A Operation & user’s manual - Page 2
2
HP F1197A Operation & user’s manual - Page 3
3
HP F1197A Operation & user’s manual - Page 4
4
HP F1197A Operation & user’s manual - Page 5
5
HP F1197A Operation & user’s manual - Page 6
6
HP F1197A Operation & user’s manual - Page 7
7
HP F1197A Operation & user’s manual - Page 8
8
HP F1197A Operation & user’s manual - Page 9
9
HP F1197A Operation & user’s manual - Page 10
10
HP F1197A Operation & user’s manual - Page 11
11
HP F1197A Operation & user’s manual - Page 12
12
HP F1197A Operation & user’s manual - Page 13
13
HP F1197A Operation & user’s manual - Page 14
14
HP F1197A Operation & user’s manual - Page 15
15
HP F1197A Operation & user’s manual - Page 16
16
HP F1197A Operation & user’s manual - Page 17
17
HP F1197A Operation & user’s manual - Page 18
18
HP F1197A Operation & user’s manual - Page 19
19
HP F1197A Operation & user’s manual - Page 20
20
HP F1197A Operation & user’s manual - Page 21
21
1-11
To disconnect and reconnect the CD-ROM drive
1. If you are using Windows 95, click Start, Eject PC. (This removes the OmniBook
from its docked configuration with the CD-ROM drive.)
2. Unplug the SCSI adapter cable from the OmniBook’s docking/SCSI connector.
This causes an undocking event on the OmniBook.
If you’re using Windows for Workgroups, you should then restart your
computer: exit Windows and press
CTRL+ALT+DEL, or follow the displayed
UNDOCKED prompt and press ENTER to restart.
3. Turn off the CD-ROM drive. The on message disappears from the CD-ROM
display.
4. When reconnecting the CD-ROM drive, make sure the drive is on before you
connect the cable. If you are using Windows for Workgroups, you will need to
restart the computer. (You may see a DOCKED message prompting this.)
You can turn off the OmniBook and/or CD-ROM drive (such as to save power if you
are using batteries) without affecting the docking configuration of the CD-ROM
drive. If you are using Windows for Workgroups, you might see a DOCKED
message when you turn the OmniBook back on, but you actually do not need to
restart the computer (unless you have changed a peripheral connection).