• Home
• Brands
• HP Manuals
• HP OmniBook 5500
• HP OmniBook 2000 User's Manual

HP OmniBook 2000 User's Manual

Download Operation & user’s manual of HP OmniBook 5500 CD/CDR Drive, Computer Accessories for Free or View it Online on All-Guides.com. This version of HP OmniBook 5500 Manual compatible with such list of devices, as: OmniBook 5500, OmniBook 2000, OmniBook 5700 - Notebook PC, OmniBook 800, OmniBook Sojourn

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

21

22

23

24

25

26

27

28

29

30

31

32

33

34

35

36

37

38

39

40

41

42

43

44

Advanced System Tests

4-4

How to Run an Advanced System Test

Each test must be selected and started by the user. There are two ways of running

tests:

•

Individually, by selecting the test in the menu

•

In a batch, by using the Batch facility. Refer to “Batch Tests” on page 4-6.

To perform an advanced test, do these steps:

1.

At the top menu bar, select the component to test. The following components

are available:

•

System: processor and sub-system tests

•

Memory: BIOS, main memory, and cache memory tests

•

IDE: IDE device (such as an IDE hard disk drive) tests

•

FDD: flexible disk drive tests

•

SCSI: SCSI device (such as an SCSI hard disk drive) tests

•

KBD: keyboard tests

•

Video: graphics system tests

•

Misc: other tests, such as mouse and serial port tests.

•

User: special tests for unique OmniBook devices.

Some menus will be disabled if they are not appropriate for your PC or if devices are

disabled in the PC’s Setup program. For example, if you do not have a SCSI

controller, the SCSI menu in the advanced tests will be disabled.

2.

A sub-menu appears, showing the list of tests available for the selected

component. Select the desired test by moving the selection bar and pressing

ENTER.