HP ProLiant ML110 Install Manual
Download Installation sheet of HP ProLiant ML110 Network Storage Server, Server for Free or View it Online on All-Guides.com.
Brand: HP
Category: Network Storage Server , Server
Type: Installation sheet for HP ProLiant ML110
Pages: 4
1
2
3
4
Generation 4 Server
Installation Sheet
Read instructions completely before
beginning installation procedure.
Part number: 419978-001
First edition: September 2006
Configuring the server
1. Connect all peripherals:
•
Keyboard
• Mouse
• Monitor
NOTE:
Refer to the HP ProLiant ML110 Generation 4
Server Support CD contents for additional information and
updates not provided in this installation sheet.
2. Determine the server BIOS version:
a. Power up the server.
b. Press the
Esc key at the HP logo screen, and then press the
Pause key to halt screen movement.
c. Note the server BIOS version.
d. Verify the server BIOS version against the latest BIOS
version listed for this server on the HP website:
http://www.hp.com
e. If you do not have the latest BIOS, update the BIOS now.
Refer to the HP ProLiant ML110 Generation 4 Server
Maintenance and Service Guide
available on the HP
website: http://www.hp.com
Default boot priority
By default, the server searches
for boot devices in the following
order:
1. CD-ROM/DVD-ROM
2. Removable Devices
3.
Hard Drive
4.
Embedded NIC
Identifying server components
Front panel components
1
Optical drive
8
Drive activity indicator
2
Optical drive manual eject hole
9
Front USB 2.0 ports
3
Optical drive eject button
10
Hard drive EMI shield
4
Optical drive activity indicator
11
Hard drive EMI shield screw
5
Half-height common bay
12
Optical drive spare screws
6
Power button
13
Hard drive spare screws
7
Power LED indicator
Rear panel components
1
PSU fan 9
HP LO 100c Remote Management
Card port
2
PS/2 mouse port 10
PCI slot covers
3
PS/2 keyboard port 11
Kensington lock notch
4
Serial port B 12
Power supply outlet
5
Serial port A 13
Rear system fan
6
VGA port 14
Thumbscrew for access panel
7
Rear USB 2.0 ports 15
Cable lock provision tab
8
LAN port (RJ-45) 16
PCI slot cover lock
System board components
Item Code Description
1 DIMM1 - 4 DDRII slots
2 P70
4-pin CPU fan connector
3 U3
Intel Mukilteo 2 (MCH)
4 XU1
Intel LGA775 CPU socket
5 P3
4-pin ATX CPU power connector
6 P8
4-pin system fan connector (rear)
7 J68
Top: PS/2 mouse port
Bottom: PS/2 keyboard port
Item Code Description
8 P53
Serial port A
Serial port B
9 J69 VGA port
10 J9
Top: LAN port
Bottom: USB 2.0 ports
11 U1033
Broadcom 5721 GbE chip
12 J32
PCI-Express x 8 line with x 8 slot
13 U11 ServerEngines Chip
14 J5
SMC FW
15 J20, J21
32-bit/33-MHz 3.3V PCI bus slot
16 J33
PCI-Express x 4 line with x 8 slot
17 XBT2 Battery
18 J10
HP LO 100c Remote Management Card slot
19 U38 Intel ICH7R
20 J2
System BIOS
21 P24
Front USB connector
22 P5
Front panel connector
23 P23
IDE channel UDMA-100
24 P60, P61,P62,P64 SATA 1-4 connector
25 J4
Internal USB connector for Tape
26 J3
Internal USB connector
27 P2
24-pin ATX system board power connector
Opening the server
The access panel and the front bezel
are both detachable. You need
to remove these system covers before you can remove or replace a
server component.
Removing the access panel
HP Proliant ML110