HP 11744195 User Manual

Download Operation & user’s manual of HP 11744195 Electric Heater for Free or View it Online on All-Guides.com.

Brand: HP

Category: Electric Heater

Type: Operation & user’s manual for HP 11744195

Pages: 22

Download HP 11744195 Operation & user’s manual

HP 11744195 Operation & user’s manual - Page 1
1
HP 11744195 Operation & user’s manual - Page 2
2
HP 11744195 Operation & user’s manual - Page 3
3
HP 11744195 Operation & user’s manual - Page 4
4
HP 11744195 Operation & user’s manual - Page 5
5
HP 11744195 Operation & user’s manual - Page 6
6
HP 11744195 Operation & user’s manual - Page 7
7
HP 11744195 Operation & user’s manual - Page 8
8
HP 11744195 Operation & user’s manual - Page 9
9
HP 11744195 Operation & user’s manual - Page 10
10
HP 11744195 Operation & user’s manual - Page 11
11
HP 11744195 Operation & user’s manual - Page 12
12
HP 11744195 Operation & user’s manual - Page 13
13
HP 11744195 Operation & user’s manual - Page 14
14
HP 11744195 Operation & user’s manual - Page 15
15
HP 11744195 Operation & user’s manual - Page 16
16
HP 11744195 Operation & user’s manual - Page 17
17
HP 11744195 Operation & user’s manual - Page 18
18
HP 11744195 Operation & user’s manual - Page 19
19
HP 11744195 Operation & user’s manual - Page 20
20
HP 11744195 Operation & user’s manual - Page 21
21
HP 11744195 Operation & user’s manual - Page 22
22
Chart Environmental Chambers Features
Features
Temperature Control System:
Heating is accomplished with resistive electric elements, while cooling is accomplished
by blowing liquid nitrogen into the chamber. The liquid nitrogen is vaporized through
nozzles and the cold vapor is circulated over the products in the chamber so that liquid
nitrogen does not touch the product under test. Electric heaters are carefully selected and
arranged to provide extremely rapid rates of temperature change without exceeding safe
design limits of heat elements. The heaters and nitrogen nozzles are located in the air
conditioning plenum.
CAUTION: Although the chamber is designed to use very small amounts of liquid
nitrogen, the resulting nitrogen gas is vented out of the chamber. It is
important to monitor the oxygen levels in the working environment around
the chamber to ensure safe operating conditions.
The liquid nitrogen control is done by a solenoid valve. The solenoid valve is chosen for
its compact size and high reliability. The temperature controller tells the solenoid valve
when to open based on the temperature inside the chamber.
Cooling solenoid
valve.
Nitrogen gas
exhaust.
Air Circulation Blower:
The chamber is equipped with a non-corrosive blower wheel, which provides air
circulation to distribute temperature controlled air and minimize thermal enclosure
temperature gradients. Baffles provide output air openings to direct the air flow out of the
duct and into the workspace of the chamber. The blower is located in the air
conditioning plenum. The blower draws air flow across the heater and nitrogen nozzle
and out into the workspace of the chamber.
Instruments:
Temperature is controlled by a Watlow Series 96 temperature controller. The input to the
temperature controller is a type T thermocouple. The control thermocouple is mounted in
5