Home | About | Contact

HP AG072A User Manual

Download Installation instructions of HP AG072A Keyboard for Free or View it Online on All-Guides.com.

Brand: HP

Category: Keyboard

Type: Installation instructions

Model: HP AG072A , HP AG072A - 1U Rackmount Keyboard

Pages: 3

Download HP AG072A Installation instructions

HP AG072A Installation instructions - Page 1
1
HP AG072A Installation instructions - Page 2
2
HP AG072A Installation instructions - Page 3
3
Page 1
background image

HP 1U Rackmount 

Keyboard with USB 

Installation Instructions 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

© Copyright 2006 Hewlett-Packard Development Company, L.P. 

The information contained herein is subject to change without notice. The 
only warranties for HP products and services are set forth in the express 
warranty statements accompanying such products and services. Nothing 
herein should be construed as constituting an additional warranty. HP shall 
not be liable for technical or editorial errors or omissions contained herein. 

 

January 2006 (First Edition) 
Part Number 408569-001 

 

 

 

 

About this device 

The HP 1U Rackmount Keyboard with USB is a rack-
mountable 1U keyboard with touchpad. 

  NOTE:  1U equals 4.5 cm (1.8 in). 

The 1U rackmount keyboard is mounted on rails with space 
available to add a 1U KVM switch behind the unit. The 1U 
rackmount keyboard can be used with all HP 5000 and 
10000 Series racks. 

 

Kit contents 

The kit contains the following: 

 

HP 1U Rackmount Keyboard with USB (1) 

 

M6 screws (4) 

 

6-32 screws (5) 

 

HP 1U Adjustable Toolless Rails (2) 

 

Cable management arm with brace rail (1) 

 

Lock plates (2) 

 

USB cables (2) 

 

PS/2 cables (2) 

 

USB cable labels (4) 

This kit contains extra hardware for your convenience. 

 

Rack warning 

  WARNING:  To reduce the risk of personal 

injury or damage to the equipment, be 
sure that:
 

  The leveling feet are extended to the 

floor. 

  The full weight of the rack rests on the 

leveling feet. 

  The stabilizing feet are attached to the 

rack if it is a single-rack installation.  

  The racks are coupled together in 

multiple-rack installations.  

  Only one component is extended at a 

time. A rack may become unstable if 
more than one component is extended 
for any reason.