HP Codemaster 100 User's Manual
Download Operation & user’s manual of HP Codemaster 100 Medical Equipment for Free or View it Online on All-Guides.com.
Brand: HP
Category: Medical Equipment
Type: Operation & user’s manual for HP Codemaster 100
Pages: 270
6HWXSDQG&RQILJXUDWLRQ
Configuring the 12-Lead Option
2-25
Setup Transmission Fields
The modem initialization strings are sent from the 12-Lead option to the modem
before dialing begins. This string must be present before sending ECGs using the
modem. There is a string for landline, fax, and cellular communications.
Cellular Dialing Prefix
If the receiving modem does not support MNP-10EC cellular enhanced protocol, an
optional prefix may be used to enable data transfer over the cellular phone via your
service provider’s modem pool. This prefix may be obtained from your cellular
service provider.
Setup Gateway
The Gateway is where the ECG Manager PC gateway resides. To setup the ECG
Manager gateway function, configure the Gateway in the Setup Gateway field.
You can configure the ECG Manager gateway by entering phone numbers on the
Telephone Directory screen. After an ECG is acquired from the patient, it can be
transmitted through the ECG Manager gateway by pushing the Send key. Select the
desired final destination site on the Telephone Directory screen. This is the site
where the ECG Manager gateway will forward the ECG report, automatically.
These ECGs can also be autoforwarded to other destinations set up in the telephone
directory.
During the transmission process, the HP CodeMaster 100 will dial the Gateway
phone number and transmit the ECG report along with the phone number of the final
destination.